A-1 Cardone 18-P4167 - Brake Caliper
- Part Number
- 18-P4167
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
$4049
+$38.40 Core Deposit
Total price w/ core: $78.89
MSRP: $71.65
Save: $31.16
In stock
limited availability at this price!
A-1 CARDONE part description
Brand: Cardone Industries
Manufacturer's Part Number: 18P4167
Part Type: Brake Calipers
Product Line: Cardone Remanufactured Brake Calipers
UPC: 00884548156876
Caliper Series: Stock
Caliper Piston Quantity: One
Caliper Material: Cast iron
Caliper Finish: Silver powdercoated
Parking Brake Provision: No
Fittings Included: No
Brake Pads Included: No
Brackets Included: No
Quantity: Sold individually.
Notes: Steel piston model.
Cardone remanufactured brake calipers are the economical choice when replacing your worn-out OE parts. An essential component of a disc braking system, calipers slow your wheels by creating friction between the pads and rotors. These refurbished units offer a high-quality, low-cost alternative to new calipers. Cardone meticulously rebuilds, greases, and thoroughly inspects the final product before shipment. The calipers are offered with or without brackets (depending on the application) and include hardware. Thousands of options are available for fitment on virtually every make/model vehicle.
Product Description
Brake Caliper
Application Summary
Chevrolet C30 1986-79, C35 2000-91, C3500 2000-91, C3500HD 2002-91, C50 1990-88, C5500 Kodiak 1991-90, C60 1990-88, C60 Kodiak 1990, C70 1990-88, C70 Kodiak 1990, G30 1996-79, K30 1986-79, P30 1999-79, P40 1990-83, P60 1990-83, R30 1988-87, R3500 1991-89, V30 1988-87, V3500 1991-89; Dodge W250 1993-90, W350 1993-90; Freightliner MT35 2005-97, MT45 2005-98, MT55 2005-99; GMC C3500 2000-91 1986-79, C3500HD 2002-91, C5000 1990-88, C5000 Topkick 1990, C6000 1990-88, C6000 Topkick 1990, C7000 1990-88, C7000 Topkick 1990, G3500 1996-79, K3500 1986-79, P3500 1999-79, P4500 1990-83, P60 1990-83, P6000 1990-83, R3500 1991-87, V3500 1991-87
Features & Benefits
- An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure a trouble free installation.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
Inlet Port Size | 0.398 |
Piston Quantity | 1 |
Piston Material | Steel |
Package Contents | Caliper; Instruction Sheet; Hardware Kit |
Bleeder Port Size | M10x1.5 |
Brake Caliper Finish | Powder Coated |
Installation Hardware Included | Yes |
Pads Included | No |
Mounting Bolts Included | No |
Product Condition | Remanufactured |
E-waste | No |
Piston Size (OD) (in) | 3.368 |
FAQs | What type of grease is used on floating caliper mounting pins? |
Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
Caliper Color | Silver |
Abutment Clips Included | Yes |
Anti-Rattle Spring Included | Yes |
Bleeder Screw Included | Yes |
9559 | 1 |
9558 | M10x1.5 |
Bracket Included | No |
Caliper Casting Material | Cast Iron |
Caliper Color | Silver |
9611 | Powder Coated |
Caliper Slides Included | Yes |
Caliper Type | Floating |
Casting Number | 2238452-R |
Grade Type | Regular |
Inlet Fitting Type | Banjo |
9544 | M10x1.5 |
Mounting Bolt Included | No |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Pad Wear Sensor Included | No |
Pads Included | No |
7609 | 3.368 IN |
7609 | 85.55 MM |
Piston Material | Steel |
Piston Quantity | 1 |
Rust Resistant Coating | Yes |
Inlet Port Size | 10.004 MM |
Inlet Port Size | 0.394 IN |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQ_Q3 | Car pulls to one side during braking. Why? |
FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 100000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 120 |
Warranty Time UOM | MO |
Country of Origin (Primary) | US |
Harmonized Tariff Code (HTS) | 8708305090 |
Harmonized Tariff Code (Schedule B) | 8708300050 |
Canadian Harmonizing Tariff Code | 8708309920 |
UPC | 00884548156876 |
Part Interchanges
Fits Vehicles
- Freightliner MT55 (1999-2005)
- Freightliner MT45 (1998-2005)
- Freightliner MT35 (1997-2005)
- GMC P6000 (1983-1990)
- GMC P60 (1983-1990)
- GMC C3500HD (1991-2002)
- Chevrolet C3500HD (1991-2002)
- Chevrolet P60 (1983-1990)
- GMC P4500 (1983-1990)
- Chevrolet P40 (1983-1990)
- Chevrolet C35 (1991-2000)
- GMC C7000 Topkick (1990)
- GMC C6000 Topkick (1990)
- GMC C5000 Topkick (1990)
- Chevrolet C70 Kodiak (1990)
- Chevrolet C60 Kodiak (1990)
- Chevrolet C5500 Kodiak (1990-1991)
- GMC C7000 (1988-1990)
- GMC C6000 (1988-1990)
- GMC C5000 (1988-1990)
- Chevrolet C70 (1988-1990)
- Chevrolet C60 (1988-1990)
- Chevrolet C50 (1988-1990)
- GMC V3500 (1987-1991)
- GMC R3500 (1987-1991)
- GMC P3500 (1979-1999)
- GMC K3500 (1979-1986)
- GMC G3500 (1979-1996)
- GMC C3500 (1979-1986, 1991-2000)
- Chevrolet V3500 (1989-1991)
- Chevrolet V30 (1987-1988)
- Chevrolet R3500 (1989-1991)
- Chevrolet R30 (1987-1988)
- Chevrolet P30 (1979-1999)
- Chevrolet K30 (1979-1986)
- Chevrolet G30 (1979-1996)
- Chevrolet C3500 (1991-2000)
- Chevrolet C30 (1979-1986)
- Dodge W350 (1990-1993)
- Dodge W250 (1990-1993)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!