A-1 CARDONE part description

Product Description

Brake Caliper

Application Summary

Chrysler Imperial 1975-74, New Yorker 1978-74, Newport 1978-74, Town & Country 1977-74; Dodge B100 1980-78, B150 1994-81, B1500 1998-95, B200 1980-78, B250 1994-81, B2500 1998-95, B300 1980-78, B350 1994-81, B3500 1998-95, CB300 1980-78, D100 1989-84 1979-78, D150 1993-78, D200 1980-78, D250 1993-81, D300 1980-78, D350 1993-81, D400 1981-78, D450 1981-78, Monaco 1976-74, R400 1974, Ram 1500 Van 1998-95, Ram 2500 Van 1998-96, Ram 3500 Van 1998-96, Ramcharger 1993-74, RD200 1980-78, Royal Monaco 1977-75, W100 1989-84 1977-75, W100 Pickup 1974, W150 1993-77, W200 1980-75, W250 1993-81, W350 1989-81; Plymouth Fury 1974, Fury I 1974, Fury II 1974, Fury III 1974, Gran Fury 1977-75, PB100 1980-78, PB150 1983-81, PB200 1980-78, PB250 1983-81, PB300 1980-78, PB350 1983-81, Trailduster 1981-74

Features & Benefits

  • An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
  • New stainless steel hardware clips and new mounting pins are included where applicable.
  • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
  • Mounting bracket is included where applicable for a hassle-free installation.
  • Pistons are durable, resistant to cracking or pitting and handle great loads.
  • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • New washers are included where applicable for a proper seal.
  • A plastic cap plug protects every brake port thread to ensure a trouble free installation.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size 0.437
Piston Quantity 1
Piston Material Phenolic
Package Contents Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size 3/8X24
Brake Caliper Finish Powder Coated
Installation Hardware Included Yes
Pads Included No
Mounting Bolts Included No
Product Condition Remanufactured
E-waste No
Piston Size (OD) (in) 3.099
FAQs What type of grease is used on floating caliper mounting pins?
Features and Benefits Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color Silver
Abutment Clips Included Yes
Anti-Rattle Spring Included Yes
Bleeder Screw Included Yes
9559 1
9558 3/8x24
Bracket Included No
Caliper Casting Material Cast Iron
Caliper Color Silver
9611 Powder Coated
Caliper Slides Included Yes
Caliper Type Floating
Casting Number 7077
Grade Type Regular
Inlet Fitting Type Banjo
9544 7/16x20
Mounting Bolt Included No
Mounting Bracket Included No
Mounting Hardware Included Yes
Pad Wear Sensor Included No
Pads Included No
7609 78.71 MM
7609 3.099 IN
Piston Material Phenolic
Piston Quantity 1
Rust Resistant Coating Yes
Inlet Port Size 11.095 MM
Inlet Port Size 0.437 IN
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1 Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2 What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2 As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3 Car pulls to one side during braking. Why?
FAA_A3 Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4 Brakes squeal all of the time. What's causing the squeal?
FAA_A4 Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5 Could calipers be the cause of a low brake pedal?
FAA_A5 A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6 What type of grease is used on floating caliper mounting pins?
FAA_A6 A silicone grease is used on floating caliper mounting pins.
FAQ_Q7 Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7 New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part Y
Warranty Distance 100000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 120
Warranty Time UOM MO
Country of Origin (Primary) US
Harmonized Tariff Code (HTS) 8708305090
Harmonized Tariff Code (Schedule B) 8708300050
Canadian Harmonizing Tariff Code 8708309920
UPC 00884548156807

Part Interchanges

Fits Vehicles

  • Dodge R400 (1974)
  • Dodge Ram 3500 Van (1996-1998)
  • Dodge Ram 2500 Van (1996-1998)
  • Dodge Ram 1500 Van (1995-1998)
  • Plymouth Fury III (1974)
  • Plymouth Fury II (1974)
  • Plymouth Fury I (1974)
  • Plymouth Fury (1974)
  • Dodge W100 Pickup (1974)
  • Plymouth Trailduster (1974-1981)
  • Plymouth PB350 (1981-1983)
  • Plymouth PB300 (1978-1980)
  • Plymouth PB250 (1981-1983)
  • Plymouth PB200 (1978-1980)
  • Plymouth PB150 (1981-1983)
  • Plymouth PB100 (1978-1980)
  • Plymouth Gran Fury (1975-1977)
  • Dodge W350 (1981-1989)
  • Dodge W250 (1981-1993)
  • Dodge W200 (1975-1980)
  • Dodge W150 (1977-1993)
  • Dodge W100 (1975-1977, 1984-1989)
  • Dodge Royal Monaco (1975-1977)
  • Dodge Ramcharger (1974-1993)
  • Dodge Monaco (1974-1976)
  • Dodge D450 (1978-1981)
  • Dodge D400 (1978-1981)
  • Dodge D350 (1981-1993)
  • Dodge D300 (1978-1980)
  • Dodge D250 (1981-1993)
  • Dodge D200 (1978-1980)
  • Dodge D150 (1978-1993)
  • Dodge D100 (1978-1979, 1984-1989)
  • Dodge CB300 (1978-1980)
  • Dodge B3500 (1995-1998)
  • Dodge B350 (1981-1994)
  • Dodge B300 (1978-1980)
  • Dodge B2500 (1995-1998)
  • Dodge B250 (1981-1994)
  • Dodge B200 (1978-1980)
  • Dodge B1500 (1995-1998)
  • Dodge B150 (1981-1994)
  • Dodge B100 (1978-1980)
  • Dodge RD200 (1978-1980)
  • Chrysler Town & Country (1974-1977)
  • Chrysler Newport (1974-1978)
  • Chrysler New Yorker (1974-1978)
  • Chrysler Imperial (1974-1975)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)