Name: A-1 Cardone 18-P4036 Brake Caliper
SKU: 18p4036
Price: 43.99 USD
Availability: InStock

A-1 CARDONE part description

Brand: Cardone Industries

Manufacturer's Part Number: 18P4036

Part Type: Brake Calipers

Product Line: Cardone Remanufactured Brake Calipers

UPC: 00884548156746

Caliper Series: Stock

Piston Diameter (in): 2.937 in.

Caliper Piston Quantity: One

Caliper Material: Cast iron

Caliper Finish: Silver powdercoated

Parking Brake Provision: No

Fittings Included: No

Thread Size: 7/16-20 in.

Brake Pads Included: No

Brackets Included: No

Quantity: Sold individually.

Notes: Caliper includes steel pistons.

Cardone remanufactured brake calipers are the economical choice when replacing your worn-out OE parts. An essential component of a disc braking system, calipers slow your wheels by creating friction between the pads and rotors. These refurbished units offer a high-quality, low-cost alternative to new calipers. Cardone meticulously rebuilds, greases, and thoroughly inspects the final product before shipment. The calipers are offered with or without brackets (depending on the application) and include hardware. Thousands of options are available for fitment on virtually every make/model vehicle.

Product Description

Brake Caliper

Application Summary

Buick Centurion 1973-71, Electra 1976-71, Estate Wagon 1976-71, LeSabre 1976-71, Riviera 1976-71; Cadillac Commercial Chassis 1978-77, Fleetwood 1978-77; Checker Marathon 1979-71, Taxicab 1974-71; Chevrolet Bel Air 1975-71, Biscayne 1972-71, Blazer 1974-72, Brookwood 1972-71, C10 1978-75, C10 Pickup 1974-72, C10 Suburban 1978-72, C20 1978-75, C20 Pickup 1974-72, C20 Suburban 1978-72, C30 1978-75, C30 Pickup 1974-71, Caprice 1976-71, G10 1978-75, G10 Van 1974, G20 1978-75, G20 Van 1974-72, G30 1978-75, G30 Van 1974-71, Impala 1976-71, K5 Blazer 1978-75, Kingswood 1972-71, P10 1978-75, P10 Van 1974-72, P20 1978-75, P20 Van 1974-72, P30 1978-75, P30 Van 1974-71, Townsman 1972-71; GMC C15 1978-75, C15 Suburban 1978-75, C15/C1500 Pickup 1974-72, C15/C1500 Suburban 1974-72, C25 1978-75, C25 Suburban 1978-75, C25/C2500 Pickup 1974-72, C25/C2500 Suburban 1974-72, C35 1978-75, C35/C3500 Pickup 1974-71, G15 1978-75, G15/G1500 Van 1974, G25 1978-75, G25/G2500 Van 1974-72, G35 1978-75, G35/G3500 Van 1974-71, Jimmy 1978-72, P15 1978-75, P15/P1500 Van 1974-72, P25 1978-75, P25/P2500 Van 1974-72, P35 1978-75, P35/P3500 Van 1974-71; Oldsmobile 98 1976-71, Custom Cruiser 1976-71, Delta 88 1976-71; Pontiac Bonneville 1976-71, Catalina 1976-71, Grandville 1975-71, Laurentian 1976, Parisienne 1976

Features & Benefits

An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
New stainless steel hardware clips and new mounting pins are included where applicable.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Pistons are durable, resistant to cracking or pitting and handle great loads.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure a trouble free installation.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size	0.437
Piston Quantity	1
Piston Material	Steel
Package Contents	Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size	3/8x24
Brake Caliper Finish	Powder Coated
Installation Hardware Included	Yes
Pads Included	No
Mounting Bolts Included	No
Product Condition	Remanufactured
E-waste	No
Piston Size (OD) (in)	2.935
FAQs	What type of grease is used on floating caliper mounting pins?
Features and Benefits	Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color	Silver
Abutment Clips Included	No
Anti-Rattle Spring Included	Yes
Bleeder Screw Included	Yes
9559	1
9558	3/8x24
Bracket Included	No
Caliper Casting Material	Cast Iron
Caliper Color	Silver
9611	Powder Coated
Caliper Slides Included	Yes
Caliper Type	Floating
Casting Number	5474176
Grade Type	Regular
Inlet Fitting Type	Banjo
9544	7/16x20
Mounting Bolt Included	Yes
Mounting Bracket Included	No
Mounting Hardware Included	Yes
Mounting Hole Diameter	15.945 MM
Mounting Hole Diameter	0.628 IN
Pad Wear Sensor Included	No
Pads Included	No
7609	74.55 MM
7609	2.935 IN
Piston Material	Steel
Piston Quantity	1
Rust Resistant Coating	Yes
Inlet Port Size	11.095 MM
Inlet Port Size	0.437 IN
Contains Electronic Components	No
Does it require SDS	No
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
FAQ_Q1	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3	Car pulls to one side during braking. Why?
FAA_A3	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4	Brakes squeal all of the time. What's causing the squeal?
FAA_A4	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5	Could calipers be the cause of a low brake pedal?
FAA_A5	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6	What type of grease is used on floating caliper mounting pins?
FAA_A6	A silicone grease is used on floating caliper mounting pins.
FAQ_Q7	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7	New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part	Y
Warranty Distance	100000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	120
Warranty Time UOM	MO
Country of Origin (Primary)	US
Harmonized Tariff Code (HTS)	8708305090
Harmonized Tariff Code (Schedule B)	8708300050
Canadian Harmonizing Tariff Code	8708309920
UPC	00884548156746

Part Interchanges

Fits Vehicles

Checker Taxicab (1971-1974)
Pontiac Parisienne (1976)
GMC P35/P3500 Van (1971-1974)
GMC P25/P2500 Van (1972-1974)
GMC P15/P1500 Van (1972-1974)
GMC G35/G3500 Van (1971-1974)
GMC G25/G2500 Van (1972-1974)
GMC G15/G1500 Van (1974)
GMC C35/C3500 Pickup (1971-1974)
GMC C25/C2500 Suburban (1972-1974)
GMC C25/C2500 Pickup (1972-1974)
GMC C15/C1500 Suburban (1972-1974)
GMC C15/C1500 Pickup (1972-1974)
Chevrolet Townsman (1971-1972)
Chevrolet P30 Van (1971-1974)
Chevrolet P20 Van (1972-1974)
Chevrolet P10 Van (1972-1974)
Chevrolet Kingswood (1971-1972)
Chevrolet G30 Van (1971-1974)
Chevrolet G20 Van (1972-1974)
Chevrolet G10 Van (1974)
Chevrolet C30 Pickup (1971-1974)
Chevrolet C20 Pickup (1972-1974)
Chevrolet C10 Pickup (1972-1974)
Chevrolet Brookwood (1971-1972)
Chevrolet Blazer (1972-1974)
Chevrolet Biscayne (1971-1972)
Buick Centurion (1971-1973)
Pontiac Laurentian (1976)
Pontiac Grandville (1971-1975)
Pontiac Catalina (1971-1976)
Pontiac Bonneville (1971-1976)
Oldsmobile Delta 88 (1971-1976)
Oldsmobile Custom Cruiser (1971-1976)
Oldsmobile 98 (1971-1976)
GMC P35 (1975-1978)
GMC P25 (1975-1978)
GMC P15 (1975-1978)
GMC Jimmy (1972-1978)
GMC G35 (1975-1978)
GMC G25 (1975-1978)
GMC G15 (1975-1978)
GMC C35 (1975-1978)
GMC C25 Suburban (1975-1978)
GMC C25 (1975-1978)
GMC C15 Suburban (1975-1978)
GMC C15 (1975-1978)
Chevrolet P30 (1975-1978)
Chevrolet P20 (1975-1978)
Chevrolet P10 (1975-1978)
Chevrolet Impala (1971-1976)
Chevrolet G30 (1975-1978)
Chevrolet G20 (1975-1978)
Chevrolet G10 (1975-1978)
Chevrolet Caprice (1971-1976)
Chevrolet C30 (1975-1978)
Chevrolet C20 Suburban (1972-1978)
Chevrolet C20 (1975-1978)
Chevrolet C10 Suburban (1972-1978)
Chevrolet C10 (1975-1978)
Chevrolet K5 Blazer (1975-1978)
Chevrolet Bel Air (1971-1975)
Cadillac Fleetwood (1977-1978)
Cadillac Commercial Chassis (1977-1978)
Buick Riviera (1971-1976)
Buick LeSabre (1971-1976)
Buick Estate Wagon (1971-1976)
Buick Electra (1971-1976)
Checker Marathon (1971-1979)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)