A-1 Cardone 18-P4020 - Brake Caliper
- Part Number
- 18-P4020
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
$4399
+$34.80 Core Deposit
Total price w/ core: $78.79
MSRP: $53.12
Save: $9.13
In stock
limited availability at this price!
A-1 CARDONE part description
Brand: Cardone Industries
Manufacturer's Part Number: 18P4020
Part Type: Brake Calipers
Product Line: Cardone Remanufactured Brake Calipers
UPC: 00884548156692
Caliper Series: Stock
Piston Diameter (in): 2.937 in.
Caliper Piston Quantity: One
Caliper Material: Cast iron
Caliper Finish: Silver powdercoated
Parking Brake Provision: No
Fittings Included: No
Thread Size: 10mm x 1.5
Brake Pads Included: No
Brackets Included: No
Quantity: Sold individually.
Notes: Caliper includes steel pistons.
Cardone remanufactured brake calipers are the economical choice when replacing your worn-out OE parts. An essential component of a disc braking system, calipers slow your wheels by creating friction between the pads and rotors. These refurbished units offer a high-quality, low-cost alternative to new calipers. Cardone meticulously rebuilds, greases, and thoroughly inspects the final product before shipment. The calipers are offered with or without brackets (depending on the application) and include hardware. Thousands of options are available for fitment on virtually every make/model vehicle.
Product Description
Brake Caliper
Application Summary
Buick Electra 1989-78, Estate Wagon 1983-78, LeSabre 1990-78, Riviera 1978, Roadmaster 1996-91, Skylark 1979-78; Cadillac Brougham 1992-87, Commercial Chassis 1996-92, DeVille 1984-78, Fleetwood 1996-93 1986-78, Seville 1979-78; Chevrolet Astro 2002-85, Bel Air 1981, C10 1986-81, Camaro 1981-78, Caprice 1996-78, Impala 1996-94 1985-78, Nova 1979-78, R10 1987; GMC C1500 1986-81, R1500 1987, Safari 2002-85; Oldsmobile 98 1984-78, Custom Cruiser 1992-78, Delta 88 1985-78, Omega 1979-78; Pontiac Bonneville 1981-78, Catalina 1981-78, Firebird 1981-78, Laurentian 1981-78, Parisienne 1986-78, Phoenix 1979-78, Safari 1989-87
Features & Benefits
- An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure a trouble free installation.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
Inlet Port Size | 0.398 |
Piston Quantity | 1 |
Piston Material | Steel |
Package Contents | Caliper; Instruction Sheet; Hardware Kit |
Bleeder Port Size | M10X1.5 |
Brake Caliper Finish | Powder Coated |
Installation Hardware Included | Yes |
Pads Included | No |
Mounting Bolts Included | No |
Product Condition | Remanufactured |
E-waste | No |
Piston Size (OD) (in) | 2.935 |
FAQs | What type of grease is used on floating caliper mounting pins? |
Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
Caliper Color | Silver |
Abutment Clips Included | No |
Anti-Rattle Spring Included | Yes |
Bleeder Screw Included | Yes |
9559 | 1 |
9558 | M10x1.5 |
Bracket Included | No |
Caliper Casting Material | Cast Iron |
Caliper Color | Silver |
9611 | Powder Coated |
Caliper Slides Included | Yes |
Caliper Type | Floating |
Casting Number | K18007151 |
Grade Type | Regular |
Inlet Fitting Type | Banjo |
9544 | M10x1.5 |
Mounting Bolt Included | Yes |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Mounting Hole Diameter | 17.875 MM |
Mounting Hole Diameter | 0.704 IN |
Pad Wear Sensor Included | No |
Pads Included | No |
7609 | 74.55 MM |
7609 | 2.935 IN |
Piston Material | Steel |
Piston Quantity | 1 |
Rust Resistant Coating | Yes |
Inlet Port Size | 10.004 MM |
Inlet Port Size | 0.394 IN |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQ_Q3 | Car pulls to one side during braking. Why? |
FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 100000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 120 |
Warranty Time UOM | MO |
Country of Origin (Primary) | US |
Canadian Harmonizing Tariff Code | 8708309920 |
Harmonized Tariff Code (Schedule B) | 8708300050 |
Harmonized Tariff Code (HTS) | 8708305090 |
UPC | 00884548156692 |
Part Interchanges
- Chevrolet 18005265
- Chevrolet 18012309
- Chevrolet 18015428
- Chevrolet 18020904
- Buick 18005265
- Buick 18012309
- Buick 18015428
- GMC 18015428
- Cadillac 18005265
- Cadillac 18012309
- Cadillac 18015428
- Oldsmobile 18003761
- Oldsmobile 18005265
- Oldsmobile 18007946
- Oldsmobile 18012309
- Oldsmobile 18015428
- Pontiac 18003761
- Pontiac 18005265
- Pontiac 18007946
- Pontiac 18012309
- Pontiac 18015428
Fits Vehicles
- Chevrolet Bel Air (1981)
- Pontiac Laurentian (1978-1981)
- Pontiac Safari (1987-1989)
- Pontiac Phoenix (1978-1979)
- Pontiac Parisienne (1978-1986)
- Pontiac Firebird (1978-1981)
- Pontiac Catalina (1978-1981)
- Pontiac Bonneville (1978-1981)
- Oldsmobile Omega (1978-1979)
- Oldsmobile Delta 88 (1978-1985)
- Oldsmobile Custom Cruiser (1978-1992)
- Oldsmobile 98 (1978-1984)
- GMC Safari (1985-2002)
- GMC R1500 (1987)
- GMC C1500 (1981-1986)
- Chevrolet R10 (1987)
- Chevrolet Nova (1978-1979)
- Chevrolet Impala (1978-1985, 1994-1996)
- Chevrolet Caprice (1978-1996)
- Chevrolet Camaro (1978-1981)
- Chevrolet C10 (1981-1986)
- Chevrolet Astro (1985-2002)
- Cadillac Seville (1978-1979)
- Cadillac Commercial Chassis (1992-1996)
- Cadillac Brougham (1987-1992)
- Cadillac Fleetwood (1978-1986, 1993-1996)
- Cadillac DeVille (1978-1984)
- Buick Skylark (1978-1979)
- Buick Roadmaster (1991-1996)
- Buick Riviera (1978)
- Buick LeSabre (1978-1990)
- Buick Estate Wagon (1978-1983)
- Buick Electra (1978-1989)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!