A-1 Cardone 96-8739 - Power Steering Pump
- Part Number
- 96-8739
- Manufacturer
- A-1 CARDONE
- Description
-
Power Steering Pump
details
$20399
MSRP: $204.89
Save: $0.90
In stock
limited availability at this price!
. Learn more
A-1 CARDONE part description
Brand: Cardone Industries
Manufacturer's Part Number: 96-8739
Part Type: Power Steering Pumps
Product Line: Cardone Remanufactured Power Steering Pumps
UPC: 00082617712705
Power Steering Pump Model: Stock
Reservoir Included: Yes
Fittings Included: No
Inlet Attachment: Stock
Outlet Attachment: Stock
Pulley Included: No
Quantity: Sold individually.
For decades, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. Add to that the latest model coverage and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for remanufactured hard parts. Cardone products are the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name.
Features of Cardone remanufactured power steering pumps include:
* All critical components are triple-tested to ensure reliability
* All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks--Viton® does not break down at high temperatures like conventional seal material
* Every pump is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise
* Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life
* Units are supplied with 100 percent tested and calibrated pressure relief valves
Product Description
Power Steering Pump
Application Summary
AM General Hummer 1998-96; Cadillac Escalade EXT 2002; Chevrolet Avalanche 1500 2002, C1500 1996, C1500 Suburban 1996, C2500 1996, C2500 Suburban 1996, C35 2000-96, C3500 1996, C3500HD 2002-96, K1500 1996, K1500 Suburban 1996, K2500 1996, K2500 Suburban 1996, K3500 1996, Silverado 1500 2006-03, Silverado 1500 HD 2006-05 2003-01, Silverado 1500 HD Classic 2007, Silverado 2500 2004-99, Silverado 2500 HD 2010-01, Silverado 2500 HD Classic 2007, Silverado 3500 2006-01, Silverado 3500 Classic 2007, Silverado 3500 HD 2010-07, Suburban 2018-16, Suburban 2500 2013-00, Suburban 3500 HD 2018-16, Tahoe 1996; GMC C1500 1996, C1500 Suburban 1996, C2500 1996, C2500 Suburban 1996, C3500 1996, C3500HD 2002-96, K1500 1996, K1500 Suburban 1996, K2500 1996, K2500 Suburban 1996, K3500 1996, Sierra 1500 2006-01, Sierra 1500 Classic 2007, Sierra 1500 HD 2006-05 2003-01, Sierra 1500 HD Classic 2007, Sierra 2500 2004-99, Sierra 2500 HD 2010-01, Sierra 2500 HD Classic 2007, Sierra 3500 2006-01, Sierra 3500 Classic 2007, Sierra 3500 HD 2010-07, Yukon 1996, Yukon XL 2500 2013-00; Hummer H2 2007-03
Features & Benefits
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
Power Steering Pump, Steering Pump, Pump
Product Attributes
| Reservoir Included | Yes |
| Package Contents | Hydraulic Pump; Instruction Sheet; Sealing Kit |
| Product Condition | New |
| Mounting Hardware Included | No |
| Housing Material | Cast Iron |
| Pulley Included | No |
| Power Steering Outlet Thread Size | 16x1.5 |
| Hose Port Type | O-ring |
| Pulley Attachement Type | Press-On |
| Remote Reservoir | No |
| Power Steering Reservoir Cap Included | Yes |
| Power Steering Pump Inlet Attachement Type | Barb |
| Power Steering Pump Outlet Attachment Type | Threaded |
| Power Steering Pump Outlet Quantity | 1 |
| E-waste | No |
| FAQs | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
| Features and Benefits | Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle. |
| Filter Included | No |
| Hose Port Type | O-ring |
| Housing Material | Cast Iron |
| Inlet Attachment Type | Barb |
| Inlet Diameter | 0.423 IN |
| Inlet Quantity | 1 |
| Mounting Hardware Included | No |
| Outlet Attachment Type | Threaded |
| Outlet Quantity | 1 |
| Pulley Attachment Type | Press-On |
| Pulley Included | No |
| 9476 | No |
| 9898 | No |
| 9477 | Yes |
| Reservoir Included | Yes |
| Shaft Type | Press-On |
| Type | Hydraulic |
| Pulley Belt Type | Serpentine |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| FAQ_Q1 | Why is the pump making a whining noise all of the time? |
| FAA_A1 | A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures. |
| FAQ_Q2 | Why do I still have hard steering in one direction after I replaced the pump? |
| FAA_A2 | The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary. |
| FAQ_Q3 | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
| FAA_A3 | The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced. |
| FAQ_Q4 | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
| FAA_A4 | There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed. |
| FAQ_Q5 | Should I ever change my fluid, even though nothing is wrong? |
| FAA_A5 | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
| Outlet Thread Size | 16x1.5 |
Additional Information
| Remanufactured Part | N |
| Warranty Special | Limited Lifetime |
| Warranty Special UOM | TX |
| Country of Origin (Primary) | CN |
| Harmonized Tariff Code (Schedule B) | 8413600020 |
| Harmonized Tariff Code (HTS) | 8413600020 |
| Warranty Distance UOM | MI |
| Warranty Time UOM | MO |
| Canadian Harmonizing Tariff Code | 8413600011 |
| UPC | 00082617712705 |
Part Interchanges
Fits Vehicles
- Chevrolet Suburban 3500 HD (2016-2018)
- Chevrolet Silverado 1500 HD Classic (2007)
- GMC Sierra 1500 HD Classic (2007)
- GMC Sierra 2500 HD Classic (2007)
- GMC Sierra 3500 Classic (2007)
- Chevrolet Silverado 2500 HD Classic (2007)
- GMC Sierra 1500 Classic (2007)
- Chevrolet Silverado 3500 Classic (2007)
- Chevrolet Suburban (2016-2018)
- GMC C3500HD (1996-2002)
- Chevrolet C3500HD (1996-2002)
- Cadillac Escalade EXT (2002)
- Chevrolet C35 (1996-2000)
- GMC Sierra 3500 HD (2007-2010)
- Chevrolet Silverado 3500 HD (2007-2010)
- Hummer H2 (2003-2007)
- GMC Yukon XL 2500 (2000-2013)
- GMC Yukon (1996)
- GMC Sierra 3500 (2001-2006)
- GMC Sierra 2500 HD (2001-2010)
- GMC Sierra 2500 (1999-2004)
- GMC Sierra 1500 HD (2001-2003, 2005-2006)
- GMC Sierra 1500 (2001-2006)
- GMC K3500 (1996)
- GMC K2500 Suburban (1996)
- GMC K2500 (1996)
- GMC K1500 Suburban (1996)
- GMC K1500 (1996)
- GMC C3500 (1996)
- GMC C2500 Suburban (1996)
- GMC C2500 (1996)
- GMC C1500 Suburban (1996)
- GMC C1500 (1996)
- Chevrolet Tahoe (1996)
- Chevrolet Suburban 2500 (2000-2013)
- Chevrolet Silverado 3500 (2001-2006)
- Chevrolet Silverado 2500 HD (2001-2010)
- Chevrolet Silverado 2500 (1999-2004)
- Chevrolet Silverado 1500 HD (2001-2003, 2005-2006)
- Chevrolet Silverado 1500 (2003-2006)
- Chevrolet K3500 (1996)
- Chevrolet K2500 Suburban (1996)
- Chevrolet K2500 (1996)
- Chevrolet K1500 Suburban (1996)
- Chevrolet K1500 (1996)
- Chevrolet C3500 (1996)
- Chevrolet C2500 Suburban (1996)
- Chevrolet C2500 (1996)
- Chevrolet C1500 Suburban (1996)
- Chevrolet C1500 (1996)
- Chevrolet Avalanche 1500 (2002)
- AM General Hummer (1996-1998)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!
