A-1 Cardone 65-9529 - Driveshaft / Prop Shaft
- Part Number
- 65-9529
- Manufacturer
- A-1 CARDONE
- Description
-
Driveshaft / Prop Shaft
details
$34349
MSRP: $460.71
Save: $117.22
In stock
limited availability at this price!
A-1 CARDONE part description
Brand: Cardone Industries
Manufacturer's Part Number: 65-9529
Part Type: Driveshafts
Product Line: Cardone Remanufactured Driveshafts
UPC: 00082617857567
Driveshaft Material: Steel
Balanced: Yes
Assembled: Yes
Differential Yoke/Flange Included: Yes
Transmission Yoke/Flange Included: Yes
Position: Rear
Quantity: Sold individually.
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model designed for your vehicle application.
Product Description
Driveshaft / Prop Shaft
Application Summary
Chevrolet Silverado 1500 2005-99; GMC Sierra 1500 2005-99
Features & Benefits
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Prop Shaft, Drive shaft, Driveshaft, shaft
Product Attributes
Product Condition | New |
Greasable | No |
Drive Shaft Material | Steel |
E-waste | No |
Measurement Method | Measurement is taken from end of input shaft to center of U-Joint |
Tubing Outer Diameter (in) | 3.50 |
Length (in) | 51.14 |
Length (mm) | 1299 |
Tubing Outer Diameter (mm) | 89 |
Features and Benefits | Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life. |
Compressed Length | 51.14 IN |
Compressed Length | 1299.00 MM |
CV Joints Included | No |
End 1 Type | Slip Yoke |
End 2 Type | Universal Joint |
Grade Type | Regular |
Grease Fitting Included | No |
9528 | Yes |
Pre-Greased | Yes |
Shaft Diameter | 3.50 IN |
Shaft Diameter | 89.00 MM |
Shaft Material | Steel |
Slip Yoke | Yes |
Universal Joints Included | Yes |
Drive Shaft Type | Universal Joint |
Package Contents | Prop Shaft; Instruction Sheet |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | What causes prop shaft vibration? |
FAA_A1 | The most common causes of prop shaft vibrations are worn joints, an unbalanced drive shaft, poor joint lubrication, and a bent or twisted shaft. |
FAQ_Q2 | Are your shafts balanced? Why is it necessary? |
FAA_A2 | Each shaft is precisely balanced before boxing. Prop shaft balance is necessary for proper driveline operation. An unbalanced shaft can cause premature wear on other major components such as your transmission and rear differential. |
FAQ_Q3 | How is a prop shaft balanced? |
FAA_A3 | This procedure entails the distribution of mass in the rotating prop shaft. The shaft is measured and altered where necessary to ensure that vibration does not occur during operation. |
FAQ_Q4 | Do all vehicles have prop shafts? |
FAA_A4 | Not all vehicles will have a prop shaft. Prop shafts are most commonly found on all-wheel-drive and rear- wheel-drive vehicles. |
FAQ_Q5 | What is prop shaft phasing? |
FAA_A5 | Phasing is a used to describe the alignment of the yokes with each other at both ends of the prop shaft. The phase angle is the rotational position of each yoke on a prop shaft. |
FAQ_Q6 | What is a universal joint? |
FAA_A6 | A universal joint is designed to allow prop shafts to move with suspension travel while the shaft is moving. This allows power to be transmitted when the prop shaft is angled between the transmission and differential. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 18000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 12 |
Warranty Time UOM | MO |
Country of Origin (Primary) | CN |
Harmonized Tariff Code (HTS) | 8708996805 |
Harmonized Tariff Code (Schedule B) | 8708998175 |
Canadian Harmonizing Tariff Code | 8708509990 |
UPC | 00082617857567 |
Part Interchanges
Fits Vehicles
- GMC Sierra 1500 (1999-2005)
- Chevrolet Silverado 1500 (1999-2005)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!