A-1 Cardone 20-1401 - Power Steering Pump
- Part Number
- 20-1401
- Manufacturer
- A-1 CARDONE
- Description
-
Power Steering Pump
details
$10549
+$46.80 Core Deposit
Total price w/ core: $152.29
MSRP: $124.00
Save: $18.51
In stock
limited availability at this price!
A-1 CARDONE part description
Product Description
Power Steering Pump
Application Summary
Ford Edge 2010-07, Fusion 2012-10; Lincoln MKX 2010-07, MKZ 2012-07
Features & Benefits
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Power Steering Pump, Steering Pump, Pump and Reservior
Product Attributes
Reservoir Included | No |
Package Contents | Hydraulic Pump; Instruction Sheet; Sealing Kit |
Product Condition | Remanufactured |
Mounting Hardware Included | No |
Housing Material | Aluminum |
Pulley Included | Yes |
Power Steering Outlet Thread Size | 14x1.5 |
Hose Port Type | O-Ring |
Pulley Attachement Type | Press-On |
Remote Reservoir | Yes |
Power Steering Reservoir Cap Included | No |
Power Steering Pump Inlet Attachement Type | Barb |
Power Steering Pump Outlet Attachment Type | Threaded |
Power Steering Pump Outlet Quantity | 1 |
E-waste | No |
FAQs | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
Features and Benefits | Units are supplied with 100% tested and calibrated pressure relief valves. |
Filter Included | No |
Hose Port Type | O-Ring |
Housing Material | Aluminum |
Inlet Attachment Type | Barb |
Inlet Diameter | 0.786 IN |
Inlet Diameter | 19.96 MM |
Inlet Quantity | 1 |
Mounting Hardware Included | No |
Outlet Attachment Type | Threaded |
Outlet Quantity | 1 |
Pulley Attachment Type | Press-On |
Pulley Included | Yes |
9476 | Yes |
9898 | No |
9477 | No |
Reservoir Included | No |
Shaft Type | Press-On |
Type | Hydraulic |
Pulley Belt Type | Serpentine |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Why is the pump making a whining noise all of the time? |
FAA_A1 | A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems requir e special vacuum bleeding procedures. |
FAQ_Q2 | Why do I still have hard steering in one direction after I replaced the pump? |
FAA_A2 | The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary. |
FAQ_Q3 | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
FAA_A3 | The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced. |
FAQ_Q4 | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
FAA_A4 | There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed. |
FAQ_Q5 | Should I ever change my fluid, even though nothing is wrong? |
FAA_A5 | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
Outlet Thread Size | 14x1.5 |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 36000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 36 |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Harmonized Tariff Code (Schedule B) | 8413600020 |
Harmonized Tariff Code (HTS) | 8413600020 |
Canadian Harmonizing Tariff Code | 8413600011 |
UPC | 00082617804776 |
Part Interchanges
- Ford 7T4Z3A696A
- Ford 8T433A696AA
- Ford 9T433A696AA
- Ford 9T4Z3A696A
- Ford AH6C3D639AB
- Ford AH6Z3A393A
- Ford AH6Z3A696A
- Lincoln 7H6Z3A696A
- Lincoln 7T4Z3A696A
- Lincoln 9T4Z3A696A
- Lincoln AH6Z3A696A
- Lincoln 7H6Z3A696A
- Ford 9T4Z3A696A
- Ford AH6Z3A393A
- Lincoln 9T4Z3A696A
- Ford 8T433A696AA
- Ford 7T4Z3A696A
- Lincoln AH6Z3A696A
- Ford AH6Z3A696A
- Ford 9T433A696AA
- Ford AH6C3D639AB
- Lincoln 7T4Z3A696A
Fits Vehicles
- Ford Fusion (2010-2012)
- Lincoln MKX (2007-2010)
- Ford Edge (2007-2010)
- Lincoln MKZ (2007-2012)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!