A-1 CARDONE part description

  • All critical components (campaqs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade Viton seals to prevent leaks. Vitron does not break down at high temperatures like conventional seal material.
  • Every pump is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise for guaranteed performance.
  • Shafts are surfaced to O.E. specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves for guaranteed performance.

Product Description

Power Steering Pump

Application Summary

Chevrolet Blazer 1991-87, C10 1986-82, C10 Suburban 1986-82, C20 1986-82, C20 Suburban 1986-82, C30 1986-82, K10 1986-82, K10 Suburban 1986-82, K20 1986-82, K20 Suburban 1986-82, K30 1986-82, K5 Blazer 1986-82, R10 1987, R10 Suburban 1988-87, R1500 Suburban 1991-89, R20 1988-87, R20 Suburban 1988-87, R2500 Suburban 1991-89, R30 1988-87, R3500 1991-89, V10 1987, V10 Suburban 1988-87, V1500 Suburban 1991-89, V20 1987, V20 Suburban 1988-87, V2500 Suburban 1991-89, V30 1988-87, V3500 1991-89; GMC C1500 1986-82, C1500 Suburban 1986-82, C2500 1986-82, C2500 Suburban 1986-82, C3500 1986-82, Jimmy 1991-82, K1500 1986-82, K1500 Suburban 1986-82, K2500 1986-82, K2500 Suburban 1986-82, K3500 1986-82, R1500 1987, R1500 Suburban 1991-87, R2500 1988-87, R2500 Suburban 1991-87, R3500 1991-87, V1500 1987, V1500 Suburban 1991-87, V2500 1987, V2500 Suburban 1991-87, V3500 1991-87

Features & Benefits

  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Power Steering Pump, Steering Pump, Pump and Reservior

Product Attributes

Reservoir Included No
Package Contents Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition Remanufactured
Mounting Hardware Included No
Housing Material Cast Iron
Pulley Included No
Power Steering Outlet Thread Size 16x1.5
Hose Port Type O-Ring
Pulley Attachement Type Press-On
Remote Reservoir No
Power Steering Reservoir Cap Included No
Power Steering Pump Inlet Attachement Type Barb
Power Steering Pump Outlet Attachment Type Threaded
Power Steering Pump Outlet Quantity 1
E-waste No
FAQs Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and Benefits Units are supplied with 100% tested and calibrated pressure relief valves.
Filter Included No
Hose Port Type O-Ring
Housing Material Cast Iron
Inlet Attachment Type Barb
Inlet Diameter 10.74 MM
Inlet Diameter 0.423 IN
Inlet Quantity 2
Mounting Hardware Included No
Outlet Attachment Type Threaded
Outlet Quantity 1
Pulley Attachment Type Press-On
Pulley Included No
9476 No
9898 No
9477 No
Reservoir Included Yes
Shaft Type Press-On
Type Hydraulic
Pulley Belt Type Serpentine
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 Why is the pump making a whining noise all of the time?
FAA_A1 A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQ_Q2 Why do I still have hard steering in one direction after I replaced the pump?
FAA_A2 The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQ_Q3 I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAA_A3 The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQ_Q4 I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAA_A4 There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQ_Q5 Should I ever change my fluid, even though nothing is wrong?
FAA_A5 Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Outlet Thread Size 16x1.5

Additional Information

Remanufactured Part Y
Warranty Distance 36000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 36
Warranty Time UOM MO
Country of Origin (Primary) MX
Harmonized Tariff Code (Schedule B) 8413600020
Harmonized Tariff Code (HTS) 8413600020
Canadian Harmonizing Tariff Code 8413600011
UPC 00082617025188

Part Interchanges

Fits Vehicles

  • GMC V2500 (1987)
  • GMC V1500 (1987)
  • GMC V3500 (1987-1991)
  • GMC V2500 Suburban (1987-1991)
  • GMC V1500 Suburban (1987-1991)
  • GMC R1500 (1987)
  • GMC R2500 (1987-1988)
  • GMC R1500 Suburban (1987-1991)
  • GMC R3500 (1987-1991)
  • GMC R2500 Suburban (1987-1991)
  • GMC K3500 (1982-1986)
  • GMC K2500 Suburban (1982-1986)
  • GMC K2500 (1982-1986)
  • GMC K1500 Suburban (1982-1986)
  • GMC K1500 (1982-1986)
  • GMC Jimmy (1982-1991)
  • GMC C3500 (1982-1986)
  • Chevrolet V20 Suburban (1987-1988)
  • GMC C2500 Suburban (1982-1986)
  • Chevrolet V20 (1987)
  • Chevrolet V1500 Suburban (1989-1991)
  • GMC C2500 (1982-1986)
  • GMC C1500 Suburban (1982-1986)
  • GMC C1500 (1982-1986)
  • Chevrolet V10 Suburban (1987-1988)
  • Chevrolet V3500 (1989-1991)
  • Chevrolet V30 (1987-1988)
  • Chevrolet V10 (1987)
  • Chevrolet V2500 Suburban (1989-1991)
  • Chevrolet R1500 Suburban (1989-1991)
  • Chevrolet R30 (1987-1988)
  • Chevrolet R10 Suburban (1987-1988)
  • Chevrolet R3500 (1989-1991)
  • Chevrolet R2500 Suburban (1989-1991)
  • Chevrolet R20 Suburban (1987-1988)
  • Chevrolet R20 (1987-1988)
  • Chevrolet R10 (1987)
  • Chevrolet K30 (1982-1986)
  • Chevrolet K20 Suburban (1982-1986)
  • Chevrolet K20 (1982-1986)
  • Chevrolet K10 Suburban (1982-1986)
  • Chevrolet K10 (1982-1986)
  • Chevrolet C20 (1982-1986)
  • Chevrolet C30 (1982-1986)
  • Chevrolet Blazer (1987-1991)
  • Chevrolet C20 Suburban (1982-1986)
  • Chevrolet C10 Suburban (1982-1986)
  • Chevrolet C10 (1982-1986)
  • Chevrolet K5 Blazer (1982-1986)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)