Name: A-1 Cardone 18-4088 Brake Caliper
SKU: 184088
Price: 40.49 USD
Availability: InStock

A-1 CARDONE part description

100% O.E.-specific rubber seals ensure like-new performance.
100% pressure testing guarantees proper braking function on the vehicle.
Copper washers are included for a perfect seal.
Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
New bleeder screws provide trouble-free bleeding and a positive seal.
Plastic cap plug in brake port line protects threads before installation.

Product Description

Brake Caliper

Application Summary

Chevrolet C30 1978-75, C30 Pickup 1974-71, G30 1978-75, G30 Van 1974-71, K30 1978-77, P30 1978-75, P30 Van 1974-71; Freightliner MT35 2005-97, MT45 2005-98, MT55 2005-99; GMC C35 1978-75, C35/C3500 Pickup 1974-71, G35 1978-75, G35/G3500 Van 1974-71, K35 1978-77, P35 1978-75, P35/P3500 Van 1974-71; International 1452SC 1992-87, 1652SC 1997-87, 1652UPS 1997-95 1993 1991-90, 1654 1989-82, 1724 1984-82, 1754 1989-82, 1824 1984-82, 1854 1989-82, 1954 1989-84, 1955 1989-84, 200 1975-74, 2155 1989-82, 3000 1997-96, 3000FE 1997, 3000RE 1997-96, 3400 1997-96, 3600 1997-92, 3700 1994-90, 3800 1997-90, 3900FC 1994-91, 4600 1995-90, 4600LP 1994-90, 4600UH 1990, 4700 1997-90, 4700LP 1997-90, 4700LPX 1997-95, 4800 1997-90, 4900 1997-90, 7100 1992-90, M1400 Metro II 1989-87, M1600 Metro II 1989-87, S1624 1982, S1654 1989-84, S1654LP 1989-88, S1723 1985-82, S1724 1984-82, S1753 1989-84, S1754 1989-82, S1823 1982, S1824 1984-82, S1853 1989-82, S1853FC 1989-87, S1854 1989-82, S1954 1989-84, S1955 1989-84, S2155 1989-84

Features & Benefits

Pistons are durable, resistant to cracking or pitting and handle great loads.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
New stainless steel hardware clips and new mounting pins are included where applicable.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size	0.44
Piston Quantity	1
Piston Material	Steel
Package Contents	Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size	3/8x24
Brake Caliper Finish	Oil Emulsion
Installation Hardware Included	Yes
Pads Included	No
Mounting Bolts Included	No
Product Condition	Remanufactured
E-waste	No
Piston Size (OD) (mm)	85.55
Piston Size (OD) (in)	3.37
FAQs	What type of grease is used on floating caliper mounting pins?
Features and Benefits	Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color	Gray
Abutment Clips Included	Yes
Anti-Rattle Spring Included	Yes
Bleeder Screw Included	Yes
9559	1
Bracket Included	No
Caliper Casting Material	Cast Iron
Caliper Color	Gray
9611	Oil Emulsion
Caliper Slides Included	Yes
Caliper Type	Floating
Casting Number	2230355-R
Grade Type	Regular
Inlet Fitting Type	Banjo
9544	7/16x20
Mounting Bolt Included	No
Mounting Bracket Included	No
Mounting Hardware Included	Yes
Pad Wear Sensor Included	No
Pads Included	No
7609	85.547 MM
7609	3.368 IN
Piston Material	Steel
Piston Quantity	1
Bleeder Screw Cap Included	No
Rust Resistant Coating	Yes
Dust Boots Included	Yes
Bleeder Thread Size	3/8x24
Inlet Port Size	11.09543 MM
Inlet Port Size	0.437 IN
Contains Electronic Components	No
Does it require SDS	No
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
FAQ_Q1	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3	Car pulls to one side during braking. Why?
FAA_A3	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4	Brakes squeal all of the time. What's causing the squeal?
FAA_A4	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5	Could calipers be the cause of a low brake pedal?
FAA_A5	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6	What type of grease is used on floating caliper mounting pins?
FAA_A6	A silicone grease is used on floating caliper mounting pins.
FAQ_Q7	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7	New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part	Y
Warranty Distance	24000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	24
Warranty Time UOM	MO
Country of Origin (Primary)	US
Harmonized Tariff Code (Schedule B)	8708300050
Harmonized Tariff Code (HTS)	8708305090
Canadian Harmonizing Tariff Code	8708309920
UPC	00082617011235

Part Interchanges

Fits Vehicles

International 3000RE (1996-1997)
International 1724 (1982-1984)
International 1854 (1982-1989)
International 1954 (1984-1989)
International 1654 (1982-1989)
International 1754 (1982-1989)
International 1824 (1982-1984)
International 1955 (1984-1989)
International 2155 (1982-1989)
Freightliner MT55 (1999-2005)
International S1823 (1982)
International S1624 (1982)
International S1853FC (1987-1989)
International M1400 Metro II (1987-1989)
International S1854 (1982-1989)
International S2155 (1984-1989)
International S1955 (1984-1989)
International S1654LP (1988-1989)
International S1724 (1982-1984)
International S1824 (1982-1984)
International S1954 (1984-1989)
International S1853 (1982-1989)
International S1754 (1982-1989)
International S1723 (1982-1985)
International S1753 (1984-1989)
International 4900 (1990-1997)
International S1654 (1984-1989)
International 7100 (1990-1992)
International 4700LPX (1995-1997)
International 4600UH (1990)
International 4800 (1990-1997)
International 4700LP (1990-1997)
International 4700 (1990-1997)
International 4600LP (1990-1994)
International 4600 (1990-1995)
International 3800 (1990-1997)
International 3900FC (1991-1994)
International M1600 Metro II (1987-1989)
International 3700 (1990-1994)
International 3400 (1996-1997)
International 3600 (1992-1997)
International 3000FE (1997)
International 1652UPS (1990-1991, 1993, 1995-1997)
Freightliner MT35 (1997-2005)
International 1652SC (1987-1997)
International 1452SC (1987-1992)
Freightliner MT45 (1998-2005)
International 3000 (1996-1997)
International 200 (1974-1975)
GMC P35/P3500 Van (1971-1974)
GMC G35/G3500 Van (1971-1974)
GMC C35/C3500 Pickup (1971-1974)
Chevrolet P30 Van (1971-1974)
Chevrolet G30 Van (1971-1974)
Chevrolet C30 Pickup (1971-1974)
GMC P35 (1975-1978)
GMC K35 (1977-1978)
GMC G35 (1975-1978)
GMC C35 (1975-1978)
Chevrolet P30 (1975-1978)
Chevrolet K30 (1977-1978)
Chevrolet G30 (1975-1978)
Chevrolet C30 (1975-1978)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)