A-1 CARDONE part description

  • 100% O.E.-specific rubber seals ensure like-new performance.
  • 100% pressure testing guarantees proper braking function on the vehicle.
  • Copper washers are included for a perfect seal.
  • Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
  • Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • Plastic cap plug in brake port line protects threads before installation.

Product Description

Brake Caliper

Application Summary

Buick Centurion 1973-71, Electra 1976-71, Estate Wagon 1976-71, LeSabre 1976-71, Riviera 1976-71; Cadillac Commercial Chassis 1978-77, Fleetwood 1978-77; Checker Marathon 1979-71, Taxicab 1974-71; Chevrolet Bel Air 1975-71, Biscayne 1972-71, Blazer 1974-72, Brookwood 1972-71, C10 1978-75, C10 Pickup 1974-72, C10 Suburban 1978-72, C20 1978-75, C20 Pickup 1974-72, C20 Suburban 1978-72, C30 1978-75, C30 Pickup 1974-71, Caprice 1976-71, G10 1978-75, G10 Van 1974, G20 1978-75, G20 Van 1974-72, G30 1978-75, G30 Van 1974-71, Impala 1976-71, K5 Blazer 1978-75, Kingswood 1972-71, P10 1978-75, P10 Van 1974-72, P20 1978-75, P20 Van 1974-72, P30 1978-75, P30 Van 1974-71, Townsman 1972-71; GMC C15 1978-75, C15 Suburban 1978-75, C15/C1500 Pickup 1974-72, C15/C1500 Suburban 1974-72, C25 1978-75, C25 Suburban 1978-75, C25/C2500 Pickup 1974-72, C25/C2500 Suburban 1974-72, C35 1978-75, C35/C3500 Pickup 1974-71, G15 1978-75, G15/G1500 Van 1974, G25 1978-75, G25/G2500 Van 1974-72, G35 1978-75, G35/G3500 Van 1974-71, Jimmy 1978-72, P15 1978-75, P15/P1500 Van 1974-72, P25 1978-75, P25/P2500 Van 1974-72, P35 1978-75, P35/P3500 Van 1974-71; Oldsmobile 98 1976-71, Custom Cruiser 1976-71, Delta 88 1976-71; Pontiac Bonneville 1976-71, Catalina 1976-71, Grandville 1975-71, Laurentian 1976, Parisienne 1976

Features & Benefits

  • Pistons are durable, resistant to cracking or pitting and handle great loads.
  • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
  • Mounting bracket is included where applicable for a hassle-free installation.
  • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
  • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • New washers are included where applicable for a proper seal.
  • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
  • New stainless steel hardware clips and new mounting pins are included where applicable.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size 0.44
Piston Quantity 1
Piston Material Steel
Package Contents Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size 3/8x24
Brake Caliper Finish Oil Emulsion
Installation Hardware Included Yes
Pads Included No
Mounting Bolts Included Yes
Product Condition Remanufactured
E-waste No
Piston Size (OD) (mm) 74.55
Piston Size (OD) (in) 2.94
FAQs What type of grease is used on floating caliper mounting pins?
Features and Benefits Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color Gray
Abutment Clips Included No
Anti-Rattle Spring Included Yes
Bleeder Screw Included Yes
9559 1
Bracket Included No
Caliper Casting Material Cast Iron
Caliper Color Gray
9611 Oil Emulsion
Caliper Slides Included Yes
Caliper Type Floating
Casting Number 5474176
Grade Type Regular
Inlet Fitting Type Banjo
9544 7/16x20
Mounting Bolt Included Yes
Mounting Bracket Included No
Mounting Hardware Included Yes
Mounting Hole Diameter 15.94492 MM
Mounting Hole Diameter 0.628 IN
9543 15.94492 MM
9543 0.628 IN
Pad Wear Sensor Included No
Pads Included No
7609 2.935 IN
7609 74.54 MM
Piston Material Steel
Piston Quantity 1
Bleeder Screw Cap Included No
Rust Resistant Coating Yes
Dust Boots Included Yes
Bleeder Thread Size 3/8x24
Inlet Port Size 11.09543 MM
Inlet Port Size 0.437 IN
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1 Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2 What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2 As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3 Car pulls to one side during braking. Why?
FAA_A3 Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4 Brakes squeal all of the time. What's causing the squeal?
FAA_A4 Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5 Could calipers be the cause of a low brake pedal?
FAA_A5 A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6 What type of grease is used on floating caliper mounting pins?
FAA_A6 A silicone grease is used on floating caliper mounting pins.
FAQ_Q7 Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7 New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part Y
Warranty Distance 24000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 24
Warranty Time UOM MO
Country of Origin (Primary) MX
Harmonized Tariff Code (Schedule B) 8708300050
Harmonized Tariff Code (HTS) 8708305090
Canadian Harmonizing Tariff Code 8708309990
UPC 00082617010771

Part Interchanges

Fits Vehicles

  • Checker Taxicab (1971-1974)
  • Pontiac Parisienne (1976)
  • GMC G15/G1500 Van (1974)
  • GMC P15/P1500 Van (1972-1974)
  • GMC G25/G2500 Van (1972-1974)
  • GMC P35/P3500 Van (1971-1974)
  • GMC P25/P2500 Van (1972-1974)
  • GMC C35/C3500 Pickup (1971-1974)
  • GMC C25/C2500 Pickup (1972-1974)
  • GMC C15/C1500 Suburban (1972-1974)
  • GMC G35/G3500 Van (1971-1974)
  • GMC C25/C2500 Suburban (1972-1974)
  • GMC C15/C1500 Pickup (1972-1974)
  • Chevrolet G10 Van (1974)
  • Chevrolet P10 Van (1972-1974)
  • Chevrolet Kingswood (1971-1972)
  • Chevrolet Townsman (1971-1972)
  • Chevrolet G20 Van (1972-1974)
  • Chevrolet P20 Van (1972-1974)
  • Chevrolet P30 Van (1971-1974)
  • Chevrolet Brookwood (1971-1972)
  • Chevrolet G30 Van (1971-1974)
  • Chevrolet C20 Pickup (1972-1974)
  • Pontiac Laurentian (1976)
  • Chevrolet C10 Pickup (1972-1974)
  • Chevrolet Blazer (1972-1974)
  • Chevrolet Biscayne (1971-1972)
  • Chevrolet C30 Pickup (1971-1974)
  • Buick Centurion (1971-1973)
  • Pontiac Grandville (1971-1975)
  • Pontiac Catalina (1971-1976)
  • Pontiac Bonneville (1971-1976)
  • Oldsmobile Delta 88 (1971-1976)
  • Oldsmobile Custom Cruiser (1971-1976)
  • Oldsmobile 98 (1971-1976)
  • GMC P15 (1975-1978)
  • GMC P35 (1975-1978)
  • GMC P25 (1975-1978)
  • GMC Jimmy (1972-1978)
  • GMC G35 (1975-1978)
  • GMC G25 (1975-1978)
  • GMC C25 Suburban (1975-1978)
  • GMC G15 (1975-1978)
  • GMC C35 (1975-1978)
  • GMC C25 (1975-1978)
  • GMC C15 Suburban (1975-1978)
  • GMC C15 (1975-1978)
  • Chevrolet P20 (1975-1978)
  • Chevrolet P30 (1975-1978)
  • Chevrolet P10 (1975-1978)
  • Chevrolet Impala (1971-1976)
  • Chevrolet G20 (1975-1978)
  • Chevrolet G30 (1975-1978)
  • Chevrolet G10 (1975-1978)
  • Chevrolet Caprice (1971-1976)
  • Chevrolet C30 (1975-1978)
  • Chevrolet Bel Air (1971-1975)
  • Chevrolet C20 Suburban (1972-1978)
  • Chevrolet C20 (1975-1978)
  • Chevrolet C10 Suburban (1972-1978)
  • Chevrolet C10 (1975-1978)
  • Chevrolet K5 Blazer (1975-1978)
  • Cadillac Fleetwood (1977-1978)
  • Cadillac Commercial Chassis (1977-1978)
  • Buick Riviera (1971-1976)
  • Buick LeSabre (1971-1976)
  • Buick Estate Wagon (1971-1976)
  • Buick Electra (1971-1976)
  • Checker Marathon (1971-1979)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)