Name: A-1 Cardone 18-4071 Brake Caliper
SKU: 184071
Price: 43.99 USD
Availability: InStock

A-1 CARDONE part description

100% O.E.-specific rubber seals ensure like-new performance.
100% pressure testing guarantees proper braking function on the vehicle.
Copper washers are included for a perfect seal.
Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
New bleeder screws provide trouble-free bleeding and a positive seal.
Plastic cap plug in brake port line protects threads before installation.

Product Description

Brake Caliper

Application Summary

Avanti II 1985-68; Buick Century 1981-78, Regal 1987-78; Chevrolet Blazer 1997-95, Camaro 1992-82, El Camino 1987-78, LLV 1995-87, Malibu 1983-78, Monte Carlo 1988-78, S10 2003-82, S10 Blazer 1994-83; GMC Caballero 1987-78, Jimmy 1997-92, S15 1990-82, S15 Jimmy 1991-83, Sonoma 2003-91; Isuzu Hombre 2000-96; Oldsmobile Cutlass 1987-85 1981-78, Cutlass Calais 1984-78, Cutlass Cruiser 1983-80, Cutlass Salon 1987-85 1980-78, Cutlass Supreme 1988-78; Pontiac Bonneville 1986-82, Firebird 1992-82, Grand Am 1980-78, Grand LeMans 1983-78, Grand Prix 1987-78, LeMans 1981-78

Features & Benefits

Pistons are durable, resistant to cracking or pitting and handle great loads.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
New stainless steel hardware clips and new mounting pins are included where applicable.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size	0.39
Piston Quantity	1
Piston Material	Steel
Package Contents	Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size	M10x1.5
Brake Caliper Finish	Oil Emulsion
Installation Hardware Included	Yes
Pads Included	No
Mounting Bolts Included	Yes
Product Condition	Remanufactured
E-waste	No
Piston Size (OD) (mm)	63.40
Piston Size (OD) (in)	2.50
FAQs	What type of grease is used on floating caliper mounting pins?
Features and Benefits	Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color	Gray
Abutment Clips Included	No
Anti-Rattle Spring Included	Yes
Bleeder Screw Included	Yes
9559	1
Bracket Included	No
Caliper Casting Material	Cast Iron
Caliper Color	Gray
9611	Oil Emulsion
Caliper Slides Included	Yes
Caliper Type	Floating
Casting Number	367
Grade Type	Regular
Inlet Fitting Type	Banjo
9544	M10x1.5
Mounting Bolt Included	Yes
Mounting Bracket Included	No
Mounting Hardware Included	Yes
Mounting Hole Diameter	15.69102 MM
Mounting Hole Diameter	0.618 IN
9543	15.69102 MM
9543	0.618 IN
Pad Wear Sensor Included	No
Pads Included	No
7609	63.3984 MM
7609	2.496 IN
Piston Material	Steel
Piston Quantity	1
Bleeder Screw Cap Included	No
Rust Resistant Coating	Yes
Dust Boots Included	Yes
Bleeder Thread Size	M10x1.5
Inlet Port Size	10.00366 MM
Inlet Port Size	0.394 IN
Contains Electronic Components	No
Does it require SDS	No
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
FAQ_Q1	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3	Car pulls to one side during braking. Why?
FAA_A3	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4	Brakes squeal all of the time. What's causing the squeal?
FAA_A4	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5	Could calipers be the cause of a low brake pedal?
FAA_A5	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6	What type of grease is used on floating caliper mounting pins?
FAA_A6	A silicone grease is used on floating caliper mounting pins.
FAQ_Q7	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7	New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part	Y
Warranty Distance	24000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	24
Warranty Time UOM	MO
Country of Origin (Primary)	US
Harmonized Tariff Code (Schedule B)	8708300050
Harmonized Tariff Code (HTS)	8708305090
Canadian Harmonizing Tariff Code	8708309920
UPC	00082617011105

Part Interchanges

Fits Vehicles

Pontiac Grand LeMans (1978-1983)
Pontiac Grand Am (1978-1980)
Pontiac Grand Prix (1978-1987)
Pontiac LeMans (1978-1981)
Pontiac Firebird (1982-1992)
Pontiac Bonneville (1982-1986)
Oldsmobile Cutlass Supreme (1978-1988)
Oldsmobile Cutlass Cruiser (1980-1983)
Oldsmobile Cutlass (1978-1981, 1985-1987)
Oldsmobile Cutlass Calais (1978-1984)
Oldsmobile Cutlass Salon (1978-1980, 1985-1987)
GMC S15 Jimmy (1983-1991)
GMC Sonoma (1991-2003)
GMC S15 (1982-1990)
GMC Jimmy (1992-1997)
GMC Caballero (1978-1987)
Chevrolet S10 (1982-2003)
Chevrolet Blazer (1995-1997)
Chevrolet S10 Blazer (1983-1994)
Chevrolet Monte Carlo (1978-1988)
Chevrolet Malibu (1978-1983)
Chevrolet LLV (1987-1995)
Chevrolet El Camino (1978-1987)
Chevrolet Camaro (1982-1992)
Buick Regal (1978-1987)
Buick Century (1978-1981)
Isuzu Hombre (1996-2000)
Avanti II (1968-1985)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)