DEXTER AXLE part description

Dexter 10" x 2-1/4" Hub & Drum W/ 5 on 4.5 Bolt Pattern For 3,500lb AxlesThis Dexter hub & drum has a galvanized finish to help resist rusting. The hub & drum already has the races pressed in. This is the hub & drum only. The bearings, grease seal, grease cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.

  • 5 on 4.5" Bolt pattern
  • Drum is 10" in diameter on the inside
  • Fits standard 3.5k axles
  • Galvanized painted finish
  • L68111(2.361" OD) & L44610(1.98" OD) races are installed
  • Uses L68149(1.378" ID) & L44649(1.063" ID) bearings(sold separately)
  • Use with a 10" x 2-1/4" brake

Please refer to the diagram Image for these measurements



To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.

DEXTER AXLE 8-247-50 Cross Reference

We have 1 alternatives for the 8-247-50 by DEXTER AXLE:

For more than 50 years, Dexter Axle® has been a global leader in developing and manufacturing safe and reliable trailer components for recreation vehicles, utility trailers, and specialty trailers. It is also a trusted brand in agricultural, manufactured housing, and marine markets. Headquartered in Elkhart, Indiana, and established in 1960, Dexter owns 14 manufacturing facilities across the US and Canada. Metallurgical evaluations and computer-equipped tests are also done to ensure remarkable product quality and performance. An ISO 9001:2015 certified brand, Dexter is still propelled by the same principles it has since it was founded: superior quality, constant improvement, and outstanding customer service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from DEXTER AXLE (Browse all)