Dexter Axle 8-201-5 - Dexter 6 on 5.5in Hub & Drum Only For 5.2K Dexter Axles

Dexter 12" x 2" Hub & Drum W/ 6 on 5.5" Bolt Pattern For 5,200lb Axles

This hub & drum is designed for use with a #42 spindle. Each hub & drum has a capacity of 2,600 lbs. H&D uses 25580 inner bearing and a LM67048 outer bearing. The bearings, grease seal, grease cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.

• 1 25520 Race (Already Pressed In) 3.265"
• 1 LM67010 Race (Already Pressed In) 2.328"
• 1/2" Studs (Already Pressed In)
• Uses 25580(1.75" ID) and LM67048(1.25" ID) bearings (sold separately)
• 6 on 5.5" Bolt Pattern
• Use with a 12" x 2" brake

Please refer to the diagram Image for these measurements

To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.

DEXTER AXLE 8-201-5 Cross Reference

We have 1 alternatives for the 8-201-5 by DEXTER AXLE:

• 359753