Redneck Trailer WH155-5A-1411B - Tredit 1411 Series Aluminum Wheel - 15" x 5", Black, 5 Bolts on 4.5" Bolt Pattern

Aluminum wheels by Tredit are set to impress. The superior materials perform as well as they look. You can dress up your trailer and never have to deal with rust again.

Tredit aluminum wheels are made with automotive grade A356 aluminum alloy. This provides superior strength and eliminates the need for steel inserts at the stud holes.

Today's aluminum passenger and truck wheels do not have steel inserts. In the early days and even now in the industry, steel inserts are used to compensate for lower grade materials and casting methods that cannot withstand the torque retention needed for nut installation and heavy loads for trailer applications.

• 15" x 5"
• 5 on 4.5" bolt pattern
• 2150lb weight capacity at 75psi
• Center cap not included
• Clear coated for extra protection and a durable finish
• Pilot diameter is 3.19"
• Fits 1/2" studs
• 0 offset
• Meets DOT requirements
• 12 month warranty to cover manufacturing defects
• Valve stem sold separately
• Also available in silver

Please refer to the diagram Image for these measurements

To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.


To Determine Wheel Offset: Offset is the distance between the mounting face of the hub and the centerline of the rim. Inset: Refers to the distance when the mounting face is outboard of the rim centerline. Outset: Refers to the distance when the mounting face is inboard of the rim centerline.