A-1 Cardone 83-214 - Transfer Case Motor
- Part Number
- 83-214
- Manufacturer
- A-1 CARDONE
- Description
-
Transfer Case Motor
details
$14399
5 day lead time
limited availability at this price!
A-1 CARDONE part description
Product Description
Transfer Case Motor
Application Summary
Ford F-150 1999, F-250 1999, Lobo 1999
Features & Benefits
- Original design weaknesses are corrected to make alonger lasting part.
- All replacement components are O.E. quality.
- All critical components are tested to guaranteelike-new performance.
- Units are computer tested, both as sub-assembliesand as complete units to ensure reliability.
Transfer Case Motor, Transfer Case, TCM
Product Attributes
Package Contents | Transfer Case Motor; Instruction Sheet |
Product Condition | New |
Connector/Terminal Configuration | PIN |
Component Housing Material | Steel |
E-waste | Yes |
FAQs | Yes, the transfer case should be manually shifted into the two-wheel drive position at the shift shaft before the installation of the replacement motor. Typically the positions are spring-loaded and can be rotated manually. |
Features and Benefits | Load testing ensures torque power specification meets industry standards. |
Connector Gender | Female |
Connector Quantity | 1 |
Connector Shape | Rectangle |
Contains Electronic Components | No |
Does it require SDS | No |
FAA_A1 | Do not operate the motor while it is off the transfer case. This can damage the motor and set an error code that must be cleared before the motor will operate again. Shift the transfer case into the position of the motor to install. |
FAA_A2 | Yes, the transfer case should be manually shifted into the two-wheel drive position at the shift shaft before the installation of the replacement motor. Typically the positions are spring-loaded and can be rotated manually. |
FAA_A3 | A crescent wrench can be used for this operation. |
FAA_A4 | The replacement motor drive is factory-set in the 2 wheel drive position. |
FAA_A5 | This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version − there may be a software update from the Original Equipment Manufacturer. If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement. |
FAQ_Q1 | The replacement motor drive is in a different position, can I reposition before installing? |
FAQ_Q2 | Can I install the replacement motor if my Transfer Case motor failed in 4 Wheel Drive Low or High? |
FAQ_Q3 | What tool can I use to manually shift the transfer case into the two-wheel drive position before I install the replacement motor? |
FAQ_Q4 | What drivetrain position is the replacement motor drive placed in? |
FAQ_Q5 | The Service 4WD light is on and/or the 4WD is inoperative. What could cause this condition? |
Gear of Chain Type | Gear |
Grade Type | Performance |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
Mount Type | Bolt |
Mounting Hardware Included | No |
Mounting Hole Quantity | 3 |
Shift Operation Type | Electronic |
Sprocket Tooth Quantity | 3 |
Terminal Gender | Male |
Terminal Quantity | 7 |
Terminal Type | Pin |
Wire Quantity | 7 |
Wiring Harness Included | Yes |
Wiring Harness Length | 10.5 IN |
Wiring Harness Length | 266.7 MM |
Additional Information
Remanufactured Part | N |
Warranty Special UOM | TX |
Country of Origin (Primary) | CN |
Harmonized Tariff Code (HTS) | 8501106060 |
Warranty Special | Limited Lifetime |
Harmonized Tariff Code (Schedule B) | 8501106060 |
Warranty Distance UOM | MI |
Warranty Time UOM | MO |
Canadian Harmonizing Tariff Code | 8501310090 |
UPC | 00884548194083 |
Part Interchanges
Fits Vehicles
- Ford Lobo (1999)
- Ford F-250 (1999)
- Ford F-150 (1999)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!