A-1 CARDONE part description

Brand: Cardone Industries

Manufacturer's Part Number: 18P4122

Part Type: Brake Calipers

Product Line: Cardone Remanufactured Brake Calipers

UPC: 00884548156814

Caliper Series: Stock

Caliper Piston Quantity: One

Caliper Material: Cast iron

Caliper Finish: Silver powdercoated

Parking Brake Provision: No

Fittings Included: No

Brake Pads Included: No

Brackets Included: No

Quantity: Sold individually.

Notes: Steel piston model.

Cardone remanufactured brake calipers are the economical choice when replacing your worn-out OE parts. An essential component of a disc braking system, calipers slow your wheels by creating friction between the pads and rotors. These refurbished units offer a high-quality, low-cost alternative to new calipers. Cardone meticulously rebuilds, greases, and thoroughly inspects the final product before shipment. The calipers are offered with or without brackets (depending on the application) and include hardware. Thousands of options are available for fitment on virtually every make/model vehicle.

Product Description

Brake Caliper

Application Summary

Chevrolet C10 Suburban 1986-79, C20 1986-79, C20 Suburban 1986-79, C30 1986-79, G30 1996-79, K10 Suburban 1986-79, K20 1986-79, K20 Suburban 1986-79, P20 1989-79, P30 1993-79, R10 Suburban 1988-87, R1500 Suburban 1991-89, R20 1988-87, R20 Suburban 1988-87, R2500 1989, R2500 Suburban 1991-89, V10 Suburban 1988-87, V1500 Suburban 1991-89, V20 1987, V20 Suburban 1988-87, V2500 Suburban 1991-89; GMC C1500 Suburban 1986-79, C2500 1986-79, C2500 Suburban 1986-79, C3500 1986-79, G3500 1996-79, K1500 Suburban 1986-79, K2500 1986-79, K2500 Suburban 1986-79, P2500 1989-79, P3500 1993-79, R1500 Suburban 1991-87, R2500 1989-87, R2500 Suburban 1991-87, V1500 Suburban 1991-87, V2500 1987, V2500 Suburban 1991-87

Features & Benefits

  • An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
  • New stainless steel hardware clips and new mounting pins are included where applicable.
  • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
  • Mounting bracket is included where applicable for a hassle-free installation.
  • Pistons are durable, resistant to cracking or pitting and handle great loads.
  • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • New washers are included where applicable for a proper seal.
  • A plastic cap plug protects every brake port thread to ensure a trouble free installation.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size 0.398
Piston Quantity 1
Piston Material Steel
Package Contents Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size M10X1.5
Brake Caliper Finish Powder Coated
Installation Hardware Included Yes
Pads Included No
Mounting Bolts Included No
Product Condition Remanufactured
E-waste No
Piston Size (OD) (in) 3.146
FAQs What type of grease is used on floating caliper mounting pins?
Features and Benefits Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color Silver
Abutment Clips Included No
Anti-Rattle Spring Included Yes
Bleeder Screw Included Yes
9559 1
9558 M10x1.5
Bracket Included No
Caliper Casting Material Cast Iron
Caliper Color Silver
9611 Powder Coated
Caliper Slides Included Yes
Caliper Type Floating
Casting Number 18003533
Grade Type Regular
Inlet Fitting Type Banjo
9544 M10x1.5
Mounting Bolt Included Yes
Mounting Bracket Included No
Mounting Hardware Included Yes
Mounting Hole Diameter 0.702 IN
Mounting Hole Diameter 17.824 MM
Pad Wear Sensor Included No
Pads Included No
7609 79.91 MM
7609 3.146 IN
Piston Material Steel
Piston Quantity 1
Rust Resistant Coating Yes
Inlet Port Size 10.004 MM
Inlet Port Size 0.394 IN
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1 Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2 What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2 As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3 Car pulls to one side during braking. Why?
FAA_A3 Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4 Brakes squeal all of the time. What's causing the squeal?
FAA_A4 Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5 Could calipers be the cause of a low brake pedal?
FAA_A5 A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6 What type of grease is used on floating caliper mounting pins?
FAA_A6 A silicone grease is used on floating caliper mounting pins.
FAQ_Q7 Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7 New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part Y
Warranty Distance 100000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 120
Warranty Time UOM MO
Country of Origin (Primary) US
Canadian Harmonizing Tariff Code 8708309920
Harmonized Tariff Code (Schedule B) 8708300050
Harmonized Tariff Code (HTS) 8708305090
UPC 00884548156814

Part Interchanges

Fits Vehicles

  • GMC V2500 Suburban (1987-1991)
  • GMC V2500 (1987)
  • GMC V1500 Suburban (1987-1991)
  • GMC R2500 Suburban (1987-1991)
  • GMC R2500 (1987-1989)
  • GMC R1500 Suburban (1987-1991)
  • GMC P3500 (1979-1993)
  • GMC P2500 (1979-1989)
  • GMC K2500 Suburban (1979-1986)
  • GMC K2500 (1979-1986)
  • GMC K1500 Suburban (1979-1986)
  • GMC G3500 (1979-1996)
  • GMC C3500 (1979-1986)
  • GMC C2500 Suburban (1979-1986)
  • GMC C2500 (1979-1986)
  • GMC C1500 Suburban (1979-1986)
  • Chevrolet V2500 Suburban (1989-1991)
  • Chevrolet V20 Suburban (1987-1988)
  • Chevrolet V20 (1987)
  • Chevrolet V1500 Suburban (1989-1991)
  • Chevrolet V10 Suburban (1987-1988)
  • Chevrolet R2500 Suburban (1989-1991)
  • Chevrolet R2500 (1989)
  • Chevrolet R20 Suburban (1987-1988)
  • Chevrolet R20 (1987-1988)
  • Chevrolet R1500 Suburban (1989-1991)
  • Chevrolet R10 Suburban (1987-1988)
  • Chevrolet P30 (1979-1993)
  • Chevrolet P20 (1979-1989)
  • Chevrolet K20 Suburban (1979-1986)
  • Chevrolet K20 (1979-1986)
  • Chevrolet K10 Suburban (1979-1986)
  • Chevrolet G30 (1979-1996)
  • Chevrolet C30 (1979-1986)
  • Chevrolet C20 Suburban (1979-1986)
  • Chevrolet C20 (1979-1986)
  • Chevrolet C10 Suburban (1979-1986)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)