Dexter Axle 8-407-5 - Dexter 6 on 5.5in Hub & Drum Only For 4.4K Axles

Dexter 10" x 2-1/4" Hub & Drum W/ 6 on 5.5" Bolt Pattern For 4,400lb AxlesDexter hub & drum. No need to worry about the races as they are already pressed into the hub for you. This hub & drum is designed for use with a #84 spindle. Each hub has a 2,200lb capacity. The bearings, grease seal, grease cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.Will not fit standard 3,500lb axles!Will only fit on Dexter axles!Items in Kit:

• 1 LM67010 Outer Race (Already Pressed In) 2.328" OD
• 1 L68111 Inner Race (Already Pressed In) 2.361" OD
• Uses L68149(1.378" ID) & LM67048(1.25" ID) bearings(sold separately)
• 1 6 on 5.5" Hub & Drum
• 2,200lb Capacity Per Hub
• Use with a 10" x 2-1/4" 4.4K brake

Please refer to the diagram Image for these measurements

To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.

DEXTER AXLE 8-407-5 Cross Reference

We have 1 alternatives for the 8-407-5 by DEXTER AXLE:

• 359700