Dexter Axle 8-219-9 - Dexter 8 on 6.5in Oil Hub & Drum Only For Dexter 6-7K Axles

Dexter 12" x 2" Oil Hub & Drum W/ 8 on 6.5" Bolt Pattern For 5.2-7k AxlesThis hub & drum is designed for use with a #42 spindle. Each hub & drum has a capacity of 3,500 lbs. Hub & drum uses 25580 inner bearing and a 14125A outer bearing(sold separately). The bearings, oil seal, oil cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.

• 1 25520 Race (Already Pressed In) 3.265" OD
• 1 14276 Race (Already Pressed In) 2.717" OD
• 1/2" Studs (Already Pressed In)
• Uses 25580(1.75" ID) and 14125A(1.25" ID) bearings (sold separately)
• 8 on 6.5" Bolt Pattern
• Use with a 12" x 2" brake
• This is an oil bath hub and is not compatible with drive in grease caps

Please refer to the diagram Image for these measurements

To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.

DEXTER AXLE 8-219-9 Cross Reference

We have 1 alternatives for the 8-219-9 by DEXTER AXLE:

• 359780