A-1 Cardone 18-8001S - Brake Caliper
- Part Number
- 18-8001S
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
We cannot fulfill orders for this part at this time. Please check back later or request a stock notification to receive an email.
Sometimes we may have similar parts for sale, click the button below to see if anything matches.
A-1 CARDONE part description
Product Description
Brake Caliper
Application Summary
Blue Bird All American FE 1997, TC1000 1997; Freightliner FL50 2004-95, FL60 2004-92, FL70 2004-92, MB60 1994-92, MB70 1994-92; International 1452SC 1992-87, 1652SC 1997-87, 1652UPS 1997-95 1993 1991-90, 1654 1989-80, 1724 1984-79, 1754 1989-81, 1824 1984-79, 1854 1989-81, 1924 S 1982-79, 1925 S 1982-80, 1954 1989-79, 1955 1989-81, 2155 1989-81, 3000 1997-96, 3000FE 1997, 3000RE 1997-96, 3400 1997-96, 3600 1997-92, 3700 1994-90, 3800 1997-90, 3900FC 1994-91, 4600 1995-90, 4600LP 1994-90, 4600UH 1990, 4700 1997-90, 4700LP 1997-90, 4700LPX 1997-95, 4800 1997-90, 4900 1997-90, 7100 1992-90, Cargostar 1986-84, M1400 Metro II 1989-87, M1600 Metro II 1989-87, S1624 1982-80, S1654 1989-84, S1654LP 1989-88, S1723 1985-80, S1724 1984-80, S1753 1989-84, S1754 1989-81, S1823 1982-80, S1824 1984-80, S1853 1989-81, S1853FC 1989-87, S1854 1989-81, S1924 1982-80, S1925 1982-80, S1954 1989-81, S1955 1989-81, S2125 1981-80, S2155 1989-84; Sterling Truck Acterra 5500 2005-01, Acterra 6500 2005-01, Acterra 7500 2005-01
Features & Benefits
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
| Inlet Port Size | 0.44 |
| Piston Quantity | 2 |
| Piston Material | Steel |
| Package Contents | Caliper; Instruction Sheet; Hardware Kit |
| Bleeder Port Size | 7/16x24 |
| Brake Caliper Finish | Oil Emulsion |
| Installation Hardware Included | Yes |
| Pads Included | No |
| Mounting Bolts Included | No |
| Product Condition | Remanufactured |
| E-waste | No |
| Piston Size (OD) (mm) | 65.84 |
| Piston Size (OD) (in) | 2.59 |
| FAQs | What type of grease is used on floating caliper mounting pins? |
| Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
| Caliper Color | Gray |
| Abutment Clips Included | No |
| Anti-Rattle Spring Included | Yes |
| Bleeder Screw Included | Yes |
| Bracket Included | No |
| Caliper Casting Material | Cast Iron |
| Caliper Color | Gray |
| 9611 | Oil Emulsion |
| Caliper Slides Included | No |
| Caliper Type | Floating |
| Casting Number | 4151733 |
| Grade Type | Regular |
| Inlet Fitting Type | Flare |
| 9544 | 7/16x24 |
| Mounting Bolt Included | No |
| Mounting Bracket Included | No |
| Mounting Hardware Included | Yes |
| Pad Wear Sensor Included | No |
| Pads Included | No |
| 7609 | 65.8368 MM |
| 7609 | 2.592 IN |
| Piston Material | Steel |
| Piston Quantity | 2 |
| Bleeder Screw Cap Included | No |
| Rust Resistant Coating | Yes |
| Dust Boots Included | Yes |
| Bleeder Thread Size | 7/16x24 |
| Inlet Port Size | 11.09543 MM |
| Inlet Port Size | 0.437 IN |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
| FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
| FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
| FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
| FAQ_Q3 | Car pulls to one side during braking. Why? |
| FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
| FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
| FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
| FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
| FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
| FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
| FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
| FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
| FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
| Remanufactured Part | Y |
| Warranty Distance | 24000 |
| Warranty Distance UOM | DH |
| Warranty Special UOM | TX |
| Warranty Time | 24 |
| Warranty Time UOM | MO |
| Country of Origin (Primary) | US |
| Harmonized Tariff Code (Schedule B) | 8708300050 |
| Harmonized Tariff Code (HTS) | 8708305090 |
| Canadian Harmonizing Tariff Code | 8708309920 |
| UPC | 00082617267939 |
Part Interchanges
Fits Vehicles
- International 3000RE (1996-1997)
- International 1955 (1981-1989)
- International 2155 (1981-1989)
- International 1654 (1980-1989)
- International 1925 S (1980-1982)
- International 1754 (1981-1989)
- International 1854 (1981-1989)
- International 1954 (1979-1989)
- International 1824 (1979-1984)
- International 1724 (1979-1984)
- International 1924 S (1979-1982)
- Freightliner FL70 (1992-2004)
- Freightliner FL60 (1992-2004)
- International S2125 (1980-1981)
- International S2155 (1984-1989)
- International S1955 (1981-1989)
- International S1954 (1981-1989)
- International S1925 (1980-1982)
- International S1924 (1980-1982)
- International S1854 (1981-1989)
- International S1853FC (1987-1989)
- International S1853 (1981-1989)
- International S1824 (1980-1984)
- International S1823 (1980-1982)
- International S1754 (1981-1989)
- International S1753 (1984-1989)
- International S1654LP (1988-1989)
- International S1724 (1980-1984)
- International S1654 (1984-1989)
- International S1723 (1980-1985)
- International S1624 (1980-1982)
- International 7100 (1990-1992)
- International 4900 (1990-1997)
- International 4800 (1990-1997)
- International 4700LPX (1995-1997)
- International 4700LP (1990-1997)
- International 3000FE (1997)
- International 4600UH (1990)
- International 4700 (1990-1997)
- International 4600LP (1990-1994)
- International 4600 (1990-1995)
- International 3900FC (1991-1994)
- International 3800 (1990-1997)
- International 3700 (1990-1994)
- International 3600 (1992-1997)
- International 3400 (1996-1997)
- International M1600 Metro II (1987-1989)
- International M1400 Metro II (1987-1989)
- International 1652UPS (1990-1991, 1993, 1995-1997)
- International 1452SC (1987-1992)
- International 1652SC (1987-1997)
- Freightliner FL50 (1995-2004)
- Freightliner MB70 (1992-1994)
- Freightliner MB60 (1992-1994)
- International 3000 (1996-1997)
- International Cargostar (1984-1986)
- Blue Bird All American FE (1997)
- Blue Bird TC1000 (1997)
- Sterling Truck Acterra 7500 (2001-2005)
- Sterling Truck Acterra 6500 (2001-2005)
- Sterling Truck Acterra 5500 (2001-2005)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!
