A-1 CARDONE part description

Product Description

Power Steering Pump

Application Summary

Mazda MX-5 2015-06, MX-5 Miata 2015-06

Features & Benefits

  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Power Steering Pump, Steering Pump, Pump, Hydraulic Power Steering Pump

Product Attributes

Reservoir Included No
Package Contents Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition Remanufactured
Mounting Hardware Included No
Housing Material Aluminum
Pulley Included Yes
Hose Port Type O-Ring
Pulley Attachement Type Press-On
Remote Reservoir Yes
Power Steering Reservoir Cap Included No
Power Steering Pump Inlet Attachement Type Pipe
Power Steering Pump Outlet Attachment Type Threaded
Power Steering Pump Outlet Quantity 1
E-waste No
FAQs Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and Benefits Units are supplied with 100% tested and calibrated pressure relief valves.
Filter Included No
Hose Port Type O-Ring
Housing Material Aluminum
Inlet Attachment Type Barb
Inlet Diameter 14.1732 MM
Inlet Diameter 0.558 IN
Inlet Quantity 1
Mounting Hardware Included No
Outlet Attachment Type Threaded
Outlet Quantity 1
Pulley Attachment Type Press-On
Pulley Included Yes
9476 Yes
9898 No
9477 No
Reservoir Included No
Shaft Type Press-On
Type Hydraulic
Pulley Belt Type Serpentine
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 Why is the pump making a whining noise all of the time?
FAA_A1 A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQ_Q2 Why do I still have hard steering in one direction after I replaced the pump?
FAA_A2 The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQ_Q3 I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAA_A3 The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQ_Q4 I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAA_A4 There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQ_Q5 Should I ever change my fluid, even though nothing is wrong?
FAA_A5 Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Outlet Thread Size 14x1.5

Additional Information

Remanufactured Part Y
Warranty Distance 36000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 36
Warranty Time UOM MO
Country of Origin (Primary) MX
Harmonized Tariff Code (Schedule B) 8413600020
Harmonized Tariff Code (HTS) 8413600020
Canadian Harmonizing Tariff Code 8413600011
UPC 00082617843010

Part Interchanges

Fits Vehicles

  • Mazda MX-5 (2006-2015)
  • Mazda MX-5 Miata (2006-2015)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)