A-1 Cardone 30-3857 - Distributor
- Part Number
- 30-3857
- Manufacturer
- A-1 CARDONE
- Description
-
Distributor
details
$15249
MSRP: $279.29
Save: $126.80
In stock
limited availability at this price!
. Learn more
A-1 CARDONE part description
Product Description
Distributor
Application Summary
Chrysler Cordoba 1978, New Yorker 1978, Newport 1978; Dodge Charger 1978, Magnum 1978, Monaco 1978; Plymouth Fury 1978
Features & Benefits
- All electronic module components are 100% computer tested to ensure full functionality.
- O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
- Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
- Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.
- 100% new points and condensers installed where applicable.
- Remanufactured under stringent quality standards to ensure product reliability.
- Guaranteed fit and function.
- Meets or exceeds O.E.M. performance.
Distributor, Distributor and Module, Electronic Distributor, HEI Distributor
Product Attributes
| Color | Gray |
| Product Condition | Remanufactured |
| Cylinders | 8 |
| Distributor Cap Included | No |
| Ignition Rotor Included | No |
| Distributor Type | Electronic |
| Electronic Module Supplied | No |
| Coil Wire Included | No |
| Integrated Ignition Coil | No |
| E-waste | Yes |
| Features and Benefits | Remanufactured under stringent quality standards to ensure product reliability |
| Coil Wire Included | No |
| Computer Controlled Compatible | Yes |
| Connector Type | Unsealed |
| Distributor Cap Included | No |
| Grade Type | Regular |
| Housing Material | Aluminum |
| Ignition Box Required | No |
| Ignition Rotor Included | No |
| Length | 230.78 MM |
| Length | 9.086 IN |
| Marine Approved | No |
| Shaft Diameter | 0.48 IN |
| Shaft Diameter | 12.19 MM |
| Shaft Length | 8.34 IN |
| Shaft Length | 211.83 MM |
| Shaft Material | Steel |
| Terminal Gender | Male; Female |
| Terminal Quantity | 2 |
| Terminal Type | Bullet |
| Trigger Type | MagneticCoil |
| Vacuum Advance Type | Computer Controlled |
| Slip Collar | Yes |
| Package Contents | Distributor; Instruction Sheet |
| Is Prop Sixty Five Affected | No |
| Does it require SDS | No |
| Contains Electronic Components | Circuit Board |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is the item CARB affected | No |
Additional Information
| Remanufactured Part | Y |
| Warranty Distance | 18000 |
| Warranty Distance UOM | DH |
| Warranty Special UOM | TX |
| Warranty Time | 12 |
| Warranty Time UOM | MO |
| Country of Origin (Primary) | MX |
| Harmonized Tariff Code (Schedule B) | 8511300040 |
| Harmonized Tariff Code (HTS) | 8511300040 |
| Canadian Harmonizing Tariff Code | 8511300010 |
| UPC | 00082617030670 |
Part Interchanges
Fits Vehicles
- Plymouth Fury (1978)
- Dodge Monaco (1978)
- Dodge Magnum (1978)
- Dodge Charger (1978)
- Chrysler New Yorker (1978)
- Chrysler Newport (1978)
- Chrysler Cordoba (1978)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!
