A-1 CARDONE part description

Brand: Cardone Industries

Manufacturer's Part Number: 30-2605

Part Type: Distributors

Product Line: Cardone Remanufactured Distributors

UPC: 00082617029292

Computer-Controlled Compatible: No

Trigger Style: Stock

Advance Type: Stock

Ignition Box Required: No

Slip Collar: No

Housing Material: Stock

Housing Finish: Stock

Marine Use: No

Quantity: Sold individually.

Notes: Point type distributor. Does not include module.

For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet.

Features of Cardone remanufactured distributors include:

* All electronic module components are 100 percent computer-tested to ensure full functionality
* Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance
* Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness)
* OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance
* Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure

Product Description

Distributor

Application Summary

Ford 300 1963, Club 1959-55, Country Sedan 1963-55, Country Squire 1963-55, Courier Sedan Delivery 1960-55, Custom 1957, Custom 300 1959-57, Customline 1956-55, Del Rio Wagon 1958-57, F-100 1963-55, F-250 1963-55, F-350 1963-55, Fairlane 1962-55, Galaxie 1963-59, Galaxie 500 1963-62, Mainline 1956-55, Park Lane Wagon 1956, Ranch Wagon 1963-55, Ranchero 1959-57, Skyliner 1956-55, Starliner 1960, Sunliner 1960-55, Victoria 1960-55; Mercury Colony Park 1962-61, Commuter 1961, Meteor 1961, Monterey 1962-61

Features & Benefits

  • All electronic module components are 100% computer tested to ensure full functionality.
  • O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
  • Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
  • Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.
  • 100% new points and condensers installed where applicable.
  • Remanufactured under stringent quality standards to ensure product reliability.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M. performance.

Distributor, Distributor and Module, Electronic Distributor, HEI Distributor

Product Attributes

Color Gray
Product Condition Remanufactured
Cylinders 6
Distributor Cap Included No
Ignition Rotor Included No
Distributor Type Point Type
Electronic Module Supplied No
Coil Wire Included No
Integrated Ignition Coil No
E-waste Yes
Features and Benefits Remanufactured under stringent quality standards to ensure product reliability
Coil Wire Included No
Computer Controlled Compatible No
Connector Type Unsealed
Distributor Cap Included No
Gear Material Cast Iron
Gear Tooth Quantity 12
Grade Type Regular
Housing Material Aluminum
Ignition Box Required No
Ignition Rotor Included No
Length 203.78 MM
Length 8.023 IN
Marine Approved No
Shaft Diameter 11.86 MM
Shaft Diameter 0.467 IN
Shaft Length 203.78 MM
Shaft Length 8.023 IN
Shaft Material Steel
Terminal Gender Female
Terminal Quantity 1
Terminal Type Ring
Trigger Type 2 Finger
Vacuum Advance Type Vacuum
Slip Collar Yes
Package Contents Distributor; Instruction Sheet
Is Prop Sixty Five Affected No
Does it require SDS No
Contains Electronic Components Connector
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is the item CARB affected No

Additional Information

Remanufactured Part Y
Warranty Distance 18000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 12
Warranty Time UOM MO
Country of Origin (Primary) MX
Harmonized Tariff Code (Schedule B) 8511300040
Harmonized Tariff Code (HTS) 8511300040
Canadian Harmonizing Tariff Code 8511300010
UPC 00082617029292

Part Interchanges

Fits Vehicles

  • Ford F-350 (1955-1963)
  • Ford F-250 (1955-1963)
  • Ford F-100 (1955-1963)
  • Ford Custom (1957)
  • Ford 300 (1963)
  • Ford Galaxie 500 (1962-1963)
  • Mercury Commuter (1961)
  • Mercury Colony Park (1961-1962)
  • Mercury Monterey (1961-1962)
  • Mercury Meteor (1961)
  • Ford Park Lane Wagon (1956)
  • Ford Mainline (1955-1956)
  • Ford Del Rio Wagon (1957-1958)
  • Ford Customline (1955-1956)
  • Ford Custom 300 (1957-1959)
  • Ford Victoria (1955-1960)
  • Ford Sunliner (1955-1960)
  • Ford Skyliner (1955-1956)
  • Ford Starliner (1960)
  • Ford Ranchero (1957-1959)
  • Ford Ranch Wagon (1955-1963)
  • Ford Fairlane (1955-1962)
  • Ford Galaxie (1959-1963)
  • Ford Country Sedan (1955-1963)
  • Ford Courier Sedan Delivery (1955-1960)
  • Ford Country Squire (1955-1963)
  • Ford Club (1955-1959)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)