Cole Hersee 75920 - Master Disconnect Switch - Battery Master Switch, SPST, On/Off, 300A at 12V DC

Protects from hazards during vehicle servicing,and can be locked-out or tagged-out. Provides an effective emergency power cutoff. Can be used in both positive or in negative path applications. Waterproof and dustproof to ip67 (immersible). Switch can be located in the best location, regardless of environment. Composite engineered polymer housing will not rust or corrode. Tested per SAE 1455 for salt corrosion. Large red knob is easy to operate with gloved hands; 90º switch travel makes it easy to identify the switch position. Built-in lockout satisfies osha requirements for an energy isolation device. Attractive styling suitable for visible mounting close to operator. Large divider on base prevents accidental shorting of high energy cables. Fits standard Master Disconnect mounting pattern. Knob is secured in place with a set screw.

• High amperage capacityThe current handling capability or rating of a switch. Alternatively refers to the amount of charge a component (like a capacitor) can hold - measured in Farads.: 300A at 12V DC.
• Protects vehicles against tampering, theft and batteryA collection of voltaic cells grouped together to provide higher voltage and/or higher current than a single cell. The battery is a common DC power source, especially for vehicles or equipment that is used remote from the domestic power supply.
• Emergency vehicles and utility vehicles often have dual battery systems because of added power demand. Such systems necessitate the use of a Battery Selector Switch or a Low Voltage Disconnect Switch. drain.
• Protects from hazards during vehicle servicing,and can be locked-out or tagged-out. Provides an effective emergency powerElectrical energy measured according to voltage and current (normally watts). Power in watts equals volts times amperes for DC circuits.
• Can be used in both positive or in negative path applications.
• Waterproof and dustproof to ip67IP numbers refer to INGRESS PROTECTION of a device against ingfress of dust or liquid. A switch with a rating of IP67 will resist spraying with a high pressure hose. A switch with IP68 is even more resistant. These are the two most useful numbers when you're considering spec'ing a switch. (immersible).
• Switch can be located in the best location, regardless of environment.
• Composite engineered polymer housing will not rust or corrode.
• Tested per SAE 1455 for salt corrosion.
• Large red knob is easy to operate with gloved hands; 90º switch travel makes it easy to identify the switch position.
• Built-in lockout satisfies oshaThe US federal Occupational Safety and Health Administration at osha.gov OSHA's mandate is to improve health and safety in the workplace by enforcing standards. Such standards encourage the use of Master Disconnect Switches (like 75920) that can be locked-out or tagged-out. requirements for an energy isolation device.
• Attractive styling suitable for visible mounting close to operator.
• Large divider on base prevents accidental shorting of high energy cables.
• Fits standard Master Disconnect mounting pattern.
• Knob is secured in place with a set screwA threaded fastener typically used to hold a sleeve, collar or gear on a shaft to prevent relative motion. You can find it on several Cole Hersee brand knobs, many of which have a metal sleeve with set screw to insure reliable operation. A set screw normally does not have a head. Various socket types are provided to allow the set screw to be rotated. These types include hexagon socket, fluted socket, screwdriver slot and square head. .

COLE HERSEE 75920 Cross Reference

We have 2 alternatives for the 75920 by COLE HERSEE:

• 75920
• CHS75920