A-1 Cardone 18-8051 - Brake Caliper
- Part Number
- 18-8051
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
$14199
+$82.80 Core Deposit
Total price w/ core: $224.79
MSRP: $235.05
Save: $93.06
In stock
limited availability at this price!
A-1 CARDONE part description
- Silicone boots are installed to handle severe heat conditions.
- 100% O.E.-specific rubber seals ensure like-new performance.
- 100% pressure testing guarantees proper braking function on the vehicle.
- Copper washers are included for a perfect seal.
- Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
- Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- Plastic cap plug in brake port line protects threads before installation.
Product Description
Brake Caliper
Application Summary
Blue Bird All American FE 2018-03, Vision School Bus 2018-04; Chevrolet C4500 Kodiak 2008-03, C5500 Kodiak 2009-03, C6500 Kodiak 2009-02, C7500 Kodiak 2009-02, T6500 2009-04 2002, T7500 2009-04 2002; Ford F-650 2003-00, F-750 2003-00; GMC C4500 Topkick 2003, C5500 Topkick 2009-03, C6500 Topkick 2009-02, C7500 Topkick 2009-02, T6500 2009-04 2002, T7500 2009-04 2002; Hino 268 2010-05; Isuzu FSR 2002, FTR 2010-04 2002, FVR 2010-04 2002, FXR 2010-04
Features & Benefits
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
Inlet Port Size | 0.44 |
Piston Quantity | 4 |
Piston Material | Phenolic |
Package Contents | Caliper; Instruction Sheet; Hardware Kit |
Bleeder Port Size | 7/16x24 |
Brake Caliper Finish | Oil Emulsion |
Installation Hardware Included | Yes |
Pads Included | No |
Mounting Bolts Included | No |
Product Condition | Remanufactured |
E-waste | No |
Piston Size (OD) (mm) | 69.93 |
Piston Size (OD) (in) | 2.75 |
FAQs | What type of grease is used on floating caliper mounting pins? |
Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
Caliper Color | Gray |
Abutment Clips Included | No |
Anti-Rattle Spring Included | Yes |
Bleeder Screw Included | Yes |
9559 | 2 |
Bracket Included | No |
Caliper Casting Material | Cast Iron |
Caliper Color | Gray |
9611 | Oil Emulsion |
Caliper Slides Included | Yes |
Caliper Type | Floating |
Casting Number | 595B |
Grade Type | Regular |
Inlet Fitting Type | Flare |
9544 | 7/16x24 |
Mounting Bolt Included | No |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Mounting Hole Diameter | 20.26122 MM |
Mounting Hole Diameter | 0.798 IN |
9543 | 0.798 IN |
9543 | 20.26122 MM |
Pad Wear Sensor Included | No |
Pads Included | No |
7609 | 69.9262 MM |
7609 | 2.753 IN |
Piston Material | Phenolic |
Piston Quantity | 4 |
Bleeder Screw Cap Included | No |
Rust Resistant Coating | Yes |
Dust Boots Included | Yes |
Bleeder Thread Size | 7/16x24 |
Inlet Port Size | 11.09543 MM |
Inlet Port Size | 0.437 IN |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQ_Q3 | Car pulls to one side during braking. Why? |
FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 24000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 24 |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Harmonized Tariff Code (Schedule B) | 8708300050 |
Harmonized Tariff Code (HTS) | 8708305090 |
Canadian Harmonizing Tariff Code | 8708309990 |
UPC | 00082617591102 |
Part Interchanges
- Chevrolet 10373679
- Chevrolet 15004609
- Chevrolet 19150143
- Chevrolet 8889826620
- Chevrolet 88982662
- GMC 19150143
- GMC 88982662
- Ford 60450469
- Ford YC3Z2B120AA
- Ford YC3Z2B121AA
- Isuzu 2C4Z2B121CA
- Isuzu 8103736790
- Isuzu 8191501430
- Isuzu 8889826620
- Hino 2C4Z2B121CA
- Ford 60450469
- Isuzu 8103736790
- GMC 88982662
- Isuzu 8191501430
- Chevrolet 8889826620
- GMC 19150143
- Ford YC3Z2B121AA
- Chevrolet 10373679
- Chevrolet 88982662
- Ford YC3Z2B120AA
- Chevrolet 15004609
- Hino 2C4Z2B121CA
- Chevrolet 19150143
- Isuzu 2C4Z2B121CA
- Isuzu 8889826620
Fits Vehicles
- Blue Bird Vision School Bus (2004-2018)
- Blue Bird All American FE (2003-2018)
- Isuzu FSR (2002)
- Isuzu FXR (2004-2010)
- Isuzu FTR (2002, 2004-2010)
- Isuzu FVR (2002, 2004-2010)
- Ford F-650 (2000-2003)
- Ford F-750 (2000-2003)
- Chevrolet T6500 (2002, 2004-2009)
- GMC T6500 (2002, 2004-2009)
- GMC T7500 (2002, 2004-2009)
- Chevrolet T7500 (2002, 2004-2009)
- GMC C4500 Topkick (2003)
- Hino 268 (2005-2010)
- GMC C7500 Topkick (2002-2009)
- Chevrolet C5500 Kodiak (2003-2009)
- GMC C5500 Topkick (2003-2009)
- Chevrolet C6500 Kodiak (2002-2009)
- GMC C6500 Topkick (2002-2009)
- Chevrolet C7500 Kodiak (2002-2009)
- Chevrolet C4500 Kodiak (2003-2008)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!