Name: A-1 Cardone 77-8016F Powertrain Control Module
SKU: 778016f
Price: 127.49 USD
Availability: InStock

A-1 CARDONE part description

Improved over O.E. - Defective O.E. conformal coating is removed from the ECM board, including underneath the chips, and is replaced with upgraded conformal coating to ensure that chips will not lift from the board (the original cause of failure).
100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
All modules are 100% computer tested to ensure reliable operation.
On-car vehicle validation testing ensures that modules meet all fit, finish, functionality and durability requirements.

Product Description

Powertrain Control Module

Application Summary

Buick Skylark 1998-97; Chevrolet Cavalier 1999-97, S10 2000-97; GMC Sonoma 2000-97; Isuzu Hombre 2000-97; Oldsmobile Achieva 1998-97; Pontiac Grand Am 1998-97, Sunfire 1999-97

Features & Benefits

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Powertrain Control Computer, PCC, PCM, Powertrain Control Module, Module

Product Attributes

Product Condition	Remanufactured
Housing Material	Metal
Connector/Terminal Configuration	Pin/Male; Pin/Male; Pin/Male; Pin/Male
E-waste	Yes
Connector Gender	Female
Connector Quantity	2
Connector Shape	Rectangular
Contains Electronic Components	Circuit Board
Does it require SDS	No
FAA_A1	“ECM” stands for Electronic Control Module. “PCM” stands for Powertrain Control Module. Both the ECM and PCM control the engine; however, the PCM also has control over the transmission.
FAA_A2	Some GM applications have a knock module that must be transferred to the replacement module. Some older Ford applications have a calibration module that must be transferred to the replacement module.
FAA_A3	No, not all Ford vehicles require PATS reset. Check the PATS chart found on the O.E. Manufacturer’s Service site for your application.
FAA_A4	Ensure that the PCM was properly flash programmed for the vehicle. Also note whether the vehicle is equipped with the Ford "passive anti-theft system", which requires an on-car relearn.
FAA_A5	Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common causes of failures are: poor grounds and power, a bad wiring harness and short-circuited solenoids/relays.
FAA_A6	Yes, most GM vehicles have a VATS, Pass Key or Pass Lock anti-theft system.
FAA_A7	Not necessarily. There is a 30-minute manual procedure that can be done without a scanner. Refer to your O.E. manufacturer’s approved service manual for details.
FAA_A8	Chrysler models 1996 and newer will need to be VIN programmed.
FAA_A9	Check Engine Light staying on after resetting, engine turning off for no reason, loss of spark, loss of fuel injection, loss of pulse on fuel pump, intermittent starting problems.
FAQ_Q1	What’s the difference between an ECM and a PCM?
FAQ_Q2	Do I have to transfer anything from my original ECM/PCM?
FAQ_Q3	Do all Ford vehicles require a Passive Anti-Theft System (P.A.T.S) reset?
FAQ_Q4	The replacement PCM for a Ford vehicle won’t start the vehicle. Why?
FAQ_Q5	What steps should I take to ensure the original PCM is causing the issue?
FAQ_Q6	Do GM vehicles have a passive anti-theft system?
FAQ_Q7	Do I need a scanner to reset the anti-theft system
FAQ_Q8	Do all Chrysler Power Train Control Modules (PCM) need VIN programming?
FAQ_Q9	What are the most common symptoms of a bad PCM?
Flash Programming Required	Yes
Flashable	Yes
Height	73.66 MM
Height	2.9 in
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
Length	182.88 MM
Length	7.2 in
Mounting Hardware Included	No
Package Contents	Module; Instruction Sheet
Removable PROM	No
Terminal Gender	Male
Terminal Quantity	128
Terminal Type	Pin
Width	8.9 in
Width	226.06 MM

Additional Information

Remanufactured Part	Y
Warranty Distance	18000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	12
Warranty Time UOM	MO
Country of Origin (Primary)	US
Harmonized Tariff Code (HTS)	8543709860
Harmonized Tariff Code (Schedule B)	8543709665
Canadian Harmonizing Tariff Code	8543700000
UPC	00082617569200

Part Interchanges

Fits Vehicles

Pontiac Sunfire (1997-1999)
Pontiac Grand Am (1997-1998)
Oldsmobile Achieva (1997-1998)
GMC Sonoma (1997-2000)
Chevrolet S10 (1997-2000)
Chevrolet Cavalier (1997-1999)
Buick Skylark (1997-1998)
Isuzu Hombre (1997-2000)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)