A-1 Cardone 18-8058 - Brake Caliper
- Part Number
- 18-8058
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
$8049
+$37.20 Core Deposit
Total price w/ core: $117.69
MSRP: $144.87
Save: $64.38
In stock
limited availability at this price!
A-1 CARDONE part description
- Silicone boots are installed to handle severe heat conditions.
- 100% O.E.-specific rubber seals ensure like-new performance.
- 100% pressure testing guarantees proper braking function on the vehicle.
- Copper washers are included for a perfect seal.
- Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
- Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- Plastic cap plug in brake port line protects threads before installation.
Product Description
Brake Caliper
Application Summary
Blue Bird All American FE 2003-98, TC1000 2000-98, TC2000 2004-98; Ford F-53 Motorhome Chassis 2022 2020-11 2009-08, F-59 Commercial Stripped Chassis 2020-11, F-650 2008-04, F-750 2008-04; Freightliner M2 100 2009-06, M2 106 2017-03, M2 112 2013-04, MB Line 2016-10, MT35 2009-06, MT45 2018-06, MT55 2018-06, S2 2011 2009-07, S2C 2016-13; IC Corporation 1652 SC 2005-03, 3000 IC 2002, 3200 2007, 3300 Chassis 2005, 3800 2003, BE Commercial Bus 2008, BE School Bus 2009-08, CE Commercial 2008-03, CE Integrated 2009-05, CE School Bus 2004-03, FE Commercial 2009-08 2004-03, FE Integrated 2008-07 2005, FE School Bus 2009-06 2004-03, HC Integrated Commercial 2009-07, RE Commercial 2009-03, RE Integrated 2005, RE School Bus 2009-03; International 1652SC 2005-98, 3000 2002-98, 3000FE 1999-98, 3000IC 2002-00, 3000RE 2002-98, 3200 2007-02, 3300 2007-05, 3400 2002-98, 3600 1999-98, 3800 2003-98, 4100 2008-06, 4100 SBA 2008-06, 4200 2008-02, 4200LP 2008-03, 4300 2008-02, 4300LP 2008-02, 4400 2008-02, 4400LP 2008-02, 4700 2003-98, 4700LP 2002-98, 4700LPX 2002-98, 4800 2003-98, 4900 2003-98, CXT 2008-05; Kenworth T170 2018-08, T270 2017-08, T300 2007-02, T370 2018-08; Peterbilt 325 2012-08, 330 2012-08, 335 2010-08, 337 2012-10; Sterling Truck Acterra 5500 2007-01, Acterra 6500 2005-01, Acterra 7500 2005-01, L7500 2006-02, L8500 2006-02, LT7500 2006-04, LT8500 2006-04; Workhorse W20 2008-01, W21 2008-07, W22 2008-01; Workhorse Custom Chassis W22 2008-01
Features & Benefits
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
Inlet Port Size | 0.44 |
Piston Quantity | 2 |
Piston Material | Phenolic |
Package Contents | Caliper; Instruction Sheet; Hardware Kit |
Bleeder Port Size | 7/16x24 |
Brake Caliper Finish | Oil Emulsion |
Installation Hardware Included | Yes |
Pads Included | No |
Mounting Bolts Included | Yes |
Product Condition | Remanufactured |
E-waste | No |
Piston Size (OD) (mm) | 72.90 |
Piston Size (OD) (in) | 2.87 |
FAQs | What type of grease is used on floating caliper mounting pins? |
Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
Caliper Color | Gray |
Abutment Clips Included | Yes |
Anti-Rattle Spring Included | No |
Bleeder Screw Included | Yes |
9559 | 1 |
Bracket Included | No |
Caliper Casting Material | Cast Iron |
Caliper Color | Gray |
9611 | Oil Emulsion |
Caliper Slides Included | Yes |
Caliper Type | Floating |
Casting Number | 4153222 |
Grade Type | Regular |
Inlet Fitting Type | Flare |
9544 | 7/16x24 |
Mounting Bolt Included | Yes |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Mounting Hole Diameter | 12.695 MM |
Mounting Hole Diameter | 0.5 IN |
9543 | 12.695 MM |
9543 | 0.5 IN |
Pad Wear Sensor Included | No |
Pads Included | No |
7609 | 72.898 MM |
7609 | 2.87 IN |
Piston Material | Phenolic |
Piston Quantity | 2 |
Bleeder Screw Cap Included | No |
Rust Resistant Coating | Yes |
Dust Boots Included | Yes |
Bleeder Thread Size | 7/16x24 |
Inlet Port Size | 11.09543 MM |
Inlet Port Size | 0.437 IN |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQ_Q3 | Car pulls to one side during braking. Why? |
FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 24000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 24 |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Harmonized Tariff Code (Schedule B) | 8708300050 |
Harmonized Tariff Code (HTS) | 8708305090 |
Canadian Harmonizing Tariff Code | 8708309990 |
UPC | 00082617644396 |
Part Interchanges
Fits Vehicles
- Freightliner M2 100 (2006-2009)
- Freightliner S2C (2013-2016)
- Freightliner MB Line (2010-2016)
- Freightliner S2 (2007-2009, 2011)
- Peterbilt 337 (2010-2012)
- Peterbilt 325 (2008-2012)
- International 4100 SBA (2006-2008)
- Freightliner MT35 (2006-2009)
- Freightliner MT45 (2006-2018)
- Freightliner MT55 (2006-2018)
- International 4900 (1998-2003)
- International 4800 (1998-2003)
- International 4700LPX (1998-2002)
- International 4700LP (1998-2002)
- International 4700 (1998-2003)
- International 4400LP (2002-2008)
- International 4400 (2002-2008)
- International 4300LP (2002-2008)
- International 4300 (2002-2008)
- International 4200LP (2003-2008)
- International 4200 (2002-2008)
- International 4100 (2006-2008)
- International 3800 (1998-2003)
- International 3600 (1998-1999)
- International 3000RE (1998-2002)
- International 3000FE (1998-1999)
- International 3400 (1998-2002)
- International 3000IC (2000-2002)
- International 1652SC (1998-2005)
- International CXT (2005-2008)
- International 3200 (2002-2007)
- International 3300 (2005-2007)
- Freightliner M2 112 (2004-2013)
- Kenworth T270 (2008-2017)
- Kenworth T170 (2008-2018)
- Kenworth T300 (2002-2007)
- Kenworth T370 (2008-2018)
- Freightliner M2 106 (2003-2017)
- Peterbilt 330 (2008-2012)
- Peterbilt 335 (2008-2010)
- International 3000 (1998-2002)
- IC Corporation RE Integrated (2005)
- IC Corporation CE School Bus (2003-2004)
- Sterling Truck L7500 (2002-2006)
- IC Corporation 3200 (2007)
- IC Corporation FE Integrated (2005, 2007-2008)
- IC Corporation FE School Bus (2003-2004, 2006-2009)
- IC Corporation 3000 IC (2002)
- IC Corporation FE Commercial (2003-2004, 2008-2009)
- IC Corporation RE School Bus (2003-2009)
- Ford F-59 Commercial Stripped Chassis (2011-2020)
- Blue Bird All American FE (1998-2003)
- IC Corporation RE Commercial (2003-2009)
- IC Corporation BE Commercial Bus (2008)
- IC Corporation 3800 (2003)
- IC Corporation 3300 Chassis (2005)
- IC Corporation 1652 SC (2003-2005)
- IC Corporation CE Commercial (2003-2008)
- IC Corporation BE School Bus (2008-2009)
- Workhorse Custom Chassis W22 (2001-2008)
- IC Corporation HC Integrated Commercial (2007-2009)
- IC Corporation CE Integrated (2005-2009)
- Sterling Truck L8500 (2002-2006)
- Blue Bird TC1000 (1998-2000)
- Sterling Truck LT7500 (2004-2006)
- Sterling Truck LT8500 (2004-2006)
- Blue Bird TC2000 (1998-2004)
- Workhorse W21 (2007-2008)
- Workhorse W22 (2001-2008)
- Workhorse W20 (2001-2008)
- Sterling Truck Acterra 7500 (2001-2005)
- Sterling Truck Acterra 6500 (2001-2005)
- Sterling Truck Acterra 5500 (2001-2007)
- Ford F-53 Motorhome Chassis (2008-2022)
- Ford F-750 (2004-2008)
- Ford F-650 (2004-2008)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!