Name: A-1 Cardone 18-8004 Brake Caliper
SKU: 188004
Price: 81.99 USD
Availability: InStock

A-1 CARDONE part description

100% O.E.-specific rubber seals ensure like-new performance.
100% pressure testing guarantees proper braking function on the vehicle.
Copper washers are included for a perfect seal.
Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
New bleeder screws provide trouble-free bleeding and a positive seal.
Plastic cap plug in brake port line protects threads before installation.

Product Description

Brake Caliper

Application Summary

Ford B-600 1994-84, B-700 1994-84, B-7000 1987-84, C600 1986-84, C700 1986-84, C7000 1986-84, C800 1986-84, C8000 1990-84, F-600 1994-84, F-700 1998-84, F-7000 1987-84, F-800 1999-83, F-8000 1987-84, FT800 1990-84, L800 1984, L8000 1988-84, L8000F 1997-87, L9000 1997-84, LN600 1985-84, LN700 1985-84, LN7000 1997-84, LN800 1985-84, LN8000 1993-84, LN9000 1997-84, LNT800 1984, LNT8000 1989-84, LNT8000F 1989-87, LNT9000 1997-84, LT8000 1988-84, LT9000 1989-84

Features & Benefits

Pistons are durable, resistant to cracking or pitting and handle great loads.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
New stainless steel hardware clips and new mounting pins are included where applicable.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size	0.44
Piston Quantity	2
Piston Material	Steel
Package Contents	Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size	7/16x24
Brake Caliper Finish	Oil Emulsion
Installation Hardware Included	Yes
Pads Included	No
Mounting Bolts Included	No
Product Condition	Remanufactured
E-waste	No
Piston Size (OD) (mm)	63.37
Piston Size (OD) (in)	2.50
FAQs	What type of grease is used on floating caliper mounting pins?
Features and Benefits	Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color	Gray
Abutment Clips Included	No
Anti-Rattle Spring Included	Yes
Bleeder Screw Included	Yes
Bracket Included	No
Caliper Casting Material	Cast Iron
Caliper Color	Gray
9611	Oil Emulsion
Caliper Slides Included	No
Caliper Type	Fixed
Casting Number	472 T-K
Grade Type	Regular
Inlet Fitting Type	Flare
9544	7/16x24
Mounting Bolt Included	No
Mounting Bracket Included	No
Mounting Hardware Included	Yes
Pad Wear Sensor Included	No
Pads Included	No
7609	2.495 IN
7609	63.373 MM
Piston Material	Steel
Piston Quantity	2
Bleeder Screw Cap Included	No
Rust Resistant Coating	Yes
Dust Boots Included	Yes
Bleeder Thread Size	7/16x24
Inlet Port Size	11.09543 MM
Inlet Port Size	0.437 IN
Contains Electronic Components	No
Does it require SDS	No
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
FAQ_Q1	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3	Car pulls to one side during braking. Why?
FAA_A3	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4	Brakes squeal all of the time. What's causing the squeal?
FAA_A4	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5	Could calipers be the cause of a low brake pedal?
FAA_A5	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6	What type of grease is used on floating caliper mounting pins?
FAA_A6	A silicone grease is used on floating caliper mounting pins.
FAQ_Q7	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7	New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part	Y
Warranty Distance	24000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	24
Warranty Time UOM	MO
Country of Origin (Primary)	US
Harmonized Tariff Code (Schedule B)	8708300050
Harmonized Tariff Code (HTS)	8708305090
Canadian Harmonizing Tariff Code	8708309920
UPC	00082617132978

Part Interchanges

Fits Vehicles

Ford LNT8000F (1987-1989)
Ford L8000F (1987-1997)
Ford LNT800 (1984)
Ford L9000 (1984-1997)
Ford LNT8000 (1984-1989)
Ford L8000 (1984-1988)
Ford LT8000 (1984-1988)
Ford LNT9000 (1984-1997)
Ford LT9000 (1984-1989)
Ford LN9000 (1984-1997)
Ford LN700 (1984-1985)
Ford LN600 (1984-1985)
Ford L800 (1984)
Ford LN800 (1984-1985)
Ford C700 (1984-1986)
Ford B-7000 (1984-1987)
Ford B-700 (1984-1994)
Ford F-8000 (1984-1987)
Ford B-600 (1984-1994)
Ford LN7000 (1984-1997)
Ford LN8000 (1984-1993)
Ford FT800 (1984-1990)
Ford F-7000 (1984-1987)
Ford F-800 (1983-1999)
Ford F-700 (1984-1998)
Ford F-600 (1984-1994)
Ford C800 (1984-1986)
Ford C7000 (1984-1986)
Ford C8000 (1984-1990)
Ford C600 (1984-1986)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)