A-1 CARDONE part description

  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • All units are 100% vacuum tested to ensure reliable performance.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • New mounting nuts and washers ensure proper, hassle-free installation.

Product Description

Power Brake Booster

Application Summary

Suzuki Samurai 1989-86

Features & Benefits

  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • New mounting nuts and washers ensure proper, hassle-free installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
  • Meets or exceeds O.E. performance.

Power Brake Booster, Booster, Vacuum Booster

Product Attributes

Color Gray
Package Contents Booster; Instruction Sheet; Seal Kit
Product Condition Remanufactured
Material Steel
Master Cylinder Included No
Brake Booster Diaphragm Style Single
Master Cylinder Stud Thread Size M8x1.25
E-waste No
Diaphragm Diameter (in) 7.37
Diaphragm Diameter (mm) 187.12
Features and Benefits Remanufactured to match O.E. performance.
Booster Type Vacuum
Brake Pedal Rod Extension Included No
Brake Service Grade Regular
Diaphragm Diameter 7.367 IN
3914 187.12 MM
Diaphragm Type Single
Gasket Or Seal Included No
Housing Diameter 7.56 IN
1928 192.02 MM
Housing Material Steel
Master Cylinder Included No
9660 M8x1.25
Mounting Bracket Included No
Mounting Hardware Included No
9659 Yes
Stud Thread Size M8x1.25
FAQ_Q1 What does a Brake booster do?
FAA_A1 A brake booster assists in pushing the master cylinder piston when the brakes are applied. This multiplies pedal force to decrease stopping distances.
FAQ_Q2 How much vacuum does a brake booster need?
FAA_A2 For proper functionality, a brake booster will need a consistent supply of 18-21 inches of vacuum.
FAQ_Q3 How can I test my brake booster for proper functionality?
FAA_A3 With the engine off, pump the brake pedal until it feels firm and hold. Then, start the engine and the pedal will sink slightly if the booster is operating properly.
FAQ_Q4 What causes multiple booster failure?
FAA_A4 Fuel and oil vapors can enter the vehicle’s PCV system. These vapors will prematurely deteriorate the brake booster’s internal diaphragm.
FAQ_Q5 Why do my brake lights remain illuminated after installing my replacement brake booster?
FAA_A5 After replacing a brake booster, it may be necessary to adjust the brake light switch. Some vehicles contain a one-time use brake light switch. In these cases, the brake light switch will need to be replaced.
FAQ_Q6 Can I use a brake booster from a different application?
FAA_A6 No, brake boosters are application specific. Most will have different master cylinder and firewall mounting spreads.
FAQ_Q7 What is brake pedal free play?
FAA_A7 Brake pedal free play is a measurement of how far the brake pedal moves before the master cylinder first begins engagement. Some vehicles will require an adjustment. Please refer to your vehicle’s service manual.
FAQ_Q8 Why is fluid present between my master cylinder and brake booster?
FAA_A8 This is due to a failing master cylinder piston seal. This will result in brake fluid entering and contaminating the brake booster. The master cylinder and brake booster will need to be replaced.
FAQ_Q9 Why do I have less than 18 inches of vacuum supplied to my brake booster?
FAA_A9 A common cause is a restricted vacuum hose. If the vacuum line is free flowing, there could be more extensive engine damage or wear. Engine vacuum also fluctuates based on altitude. Please refer to the O.E. specification for your vehicle.
FAQ_Q10 How can I identify my brake booster?
FAA_A10 The most common way to identify the brake booster is by the vehicle application. However, most brake boosters have a pedal rod identification number stamped on the end of the rod. This can helpful in identifying the correct replacement brake booster.
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No

Additional Information

Remanufactured Part Y
Warranty Distance 18000
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time 12
Warranty Time UOM MO
Country of Origin (Primary) MX
Harmonized Tariff Code (HTS) 8413500080
Harmonized Tariff Code (Schedule B) 8413500080
Canadian Harmonizing Tariff Code 8413500090
UPC 00082617122634

Part Interchanges

Fits Vehicles

  • Suzuki Samurai (1986-1989)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)