Name: A-1 Cardone 20-6182 Remanufactured Power Steering Pump for 1965-1974 Buick Skylark / Chevy Bel Air / GMC Suburban
SKU: 206182
Price: 62.49 USD
Availability: InStock

A-1 CARDONE part description

Power Steering Pump - Remanufactured

Product Description

Power Steering Pump

Application Summary

Buick Skylark 1969-68, Special 1969-68; Chevrolet Bel Air 1974-71 1969-65, Biscayne 1972-71 1969-65, Blazer 1973, Brookwood 1972-71 1969, C10 Suburban 1974-73, C20 Suburban 1974-73, Camaro 1969-67, Caprice 1974-71 1969-67, Chevelle 1973-64, Chevy II 1968, El Camino 1974-71 1969-64, Impala 1974-71 1969-66, K10 Pickup 1974, K20 Pickup 1974-73, K20 Suburban 1973, K30 Pickup 1974-73, Kingswood 1972-71 1969, Laguna 1974-73, Malibu 1974-73 1967-64, Monte Carlo 1974-71, Nova 1969, Townsman 1972-71; GMC C15/C1500 Suburban 1974-73, Jimmy 1973, K25/K2500 Pickup 1974-73, K35/K3500 Pickup 1974-73, Sprint 1974-71; Oldsmobile Cutlass 1969-68, F85 1969-68; Pontiac Bonneville 1974-73, Catalina 1974-73, Grand Am 1974-73, Grand Safari 1974-73, Grandville 1974-73, GTO 1973, LeMans 1974-73

Features & Benefits

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Power Steering Pump, Steering Pump, Pump and Reservior

Product Attributes

Reservoir Included	No
Package Contents	Hydraulic Pump; Instruction Sheet
Product Condition	Remanufactured
Mounting Hardware Included	No
Housing Material	Cast Iron
Pulley Included	No
Power Steering Outlet Thread Size	5/8-18
Hose Port Type	Seat
Pulley Attachement Type	Bolt-On
Remote Reservoir	No
Power Steering Reservoir Cap Included	No
Power Steering Pump Inlet Attachement Type	Barb
Power Steering Pump Outlet Attachment Type	Threaded
Power Steering Pump Outlet Quantity	1
E-waste	No
FAQs	Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and Benefits	Units are supplied with 100% tested and calibrated pressure relief valves.
Filter Included	No
Hose Port Type	Seat
Housing Material	Cast Iron
Inlet Attachment Type	Barb
Inlet Diameter	10.74 MM
Inlet Diameter	0.423 IN
Inlet Quantity	1
Mounting Hardware Included	No
Outlet Attachment Type	Threaded
Outlet Quantity	1
Pulley Attachment Type	Bolt-On
Pulley Included	No
9476	No
9898	No
9477	No
Reservoir Included	Yes
Shaft Type	Keyed
Type	Hydraulic
Pulley Belt Type	V-Belt
Contains Electronic Components	No
Does it require SDS	No
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
FAQ_Q1	Why is the pump making a whining noise all of the time?
FAA_A1	A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQ_Q2	Why do I still have hard steering in one direction after I replaced the pump?
FAA_A2	The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQ_Q3	I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAA_A3	The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQ_Q4	I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAA_A4	There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQ_Q5	Should I ever change my fluid, even though nothing is wrong?
FAA_A5	Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Outlet Thread Size	5/8-18

Additional Information

Remanufactured Part	Y
Warranty Distance	36000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	36
Warranty Time UOM	MO
Country of Origin (Primary)	MX
Harmonized Tariff Code (Schedule B)	8413600020
Harmonized Tariff Code (HTS)	8413600020
Canadian Harmonizing Tariff Code	8413600011
UPC	00082617023047

Fits Vehicles

Buick Special (1968-1969)
Chevrolet Nova (1969)
Pontiac Bonneville (1973-1974)
Pontiac Grandville (1973-1974)
Pontiac LeMans (1973-1974)
Pontiac GTO (1973)
Pontiac Catalina (1973-1974)
Pontiac Grand Safari (1973-1974)
Pontiac Grand Am (1973-1974)
Oldsmobile F85 (1968-1969)
Oldsmobile Cutlass (1968-1969)
GMC Sprint (1971-1974)
GMC K25/K2500 Pickup (1973-1974)
GMC Jimmy (1973)
GMC K35/K3500 Pickup (1973-1974)
GMC C15/C1500 Suburban (1973-1974)
Chevrolet K20 Suburban (1973)
Chevrolet K10 Pickup (1974)
Chevrolet Townsman (1971-1972)
Chevrolet Chevy II (1968)
Chevrolet Monte Carlo (1971-1974)
Chevrolet Malibu (1964-1967, 1973-1974)
Chevrolet Laguna (1973-1974)
Chevrolet Kingswood (1969, 1971-1972)
Chevrolet K30 Pickup (1973-1974)
Chevrolet K20 Pickup (1973-1974)
Chevrolet Impala (1966-1969, 1971-1974)
Chevrolet C20 Suburban (1973-1974)
Chevrolet C10 Suburban (1973-1974)
Chevrolet El Camino (1964-1969, 1971-1974)
Chevrolet Chevelle (1964-1973)
Chevrolet Caprice (1967-1969, 1971-1974)
Buick Skylark (1968-1969)
Chevrolet Camaro (1967-1969)
Chevrolet Brookwood (1969, 1971-1972)
Chevrolet Blazer (1973)
Chevrolet Biscayne (1965-1969, 1971-1972)
Chevrolet Bel Air (1965-1969, 1971-1974)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)