A-1 Cardone 18-4075 - Brake Caliper
- Part Number
- 18-4075
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
$4399
+$26.40 Core Deposit
Total price w/ core: $70.39
In stock
limited availability at this price!
A-1 CARDONE part description
- 100% O.E.-specific rubber seals ensure like-new performance.
- 100% pressure testing guarantees proper braking function on the vehicle.
- Copper washers are included for a perfect seal.
- Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
- Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- Plastic cap plug in brake port line protects threads before installation.
Product Description
Brake Caliper
Application Summary
Chrysler Imperial 1975-74, New Yorker 1978-74, Newport 1978-74, Town & Country 1977-74; Dodge B100 1980-78, B150 1994-81, B1500 1998-95, B200 1980-78, B250 1994-81, B2500 1998-95, B300 1980-78, B350 1994-81, B3500 1998-95, CB300 1980-78, D100 1989-84 1979-78, D150 1993-78, D200 1980-78, D250 1993-81, D300 1980-78, D350 1993-81, D400 1981-78, D450 1981-78, Monaco 1976-74, R400 1974, Ram 1500 Van 1998-95, Ram 2500 Van 1998-96, Ram 3500 Van 1998-96, Ramcharger 1993-74, RD200 1980-78, Royal Monaco 1977-75, W100 1989-84 1977-75, W100 Pickup 1974, W150 1993-77, W200 1980-75, W250 1993-81, W350 1989-81; Plymouth Fury 1974, Fury I 1974, Fury II 1974, Fury III 1974, Gran Fury 1977-75, PB100 1980-78, PB150 1983-81, PB200 1980-78, PB250 1983-81, PB300 1980-78, PB350 1983-81, Trailduster 1981-74
Features & Benefits
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
Inlet Port Size | 0.44 |
Piston Quantity | 1 |
Piston Material | Phenolic |
Package Contents | Caliper; Instruction Sheet; Hardware Kit |
Bleeder Port Size | 3/8x24 |
Brake Caliper Finish | Oil Emulsion |
Installation Hardware Included | Yes |
Pads Included | No |
Mounting Bolts Included | No |
Product Condition | Remanufactured |
E-waste | No |
Piston Size (OD) (mm) | 78.71 |
Piston Size (OD) (in) | 3.10 |
FAQs | What type of grease is used on floating caliper mounting pins? |
Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
Caliper Color | Gray |
Abutment Clips Included | Yes |
Anti-Rattle Spring Included | Yes |
Bleeder Screw Included | Yes |
9559 | 1 |
Bracket Included | No |
Caliper Casting Material | Cast Iron |
Caliper Color | Gray |
9611 | Oil Emulsion |
Caliper Slides Included | Yes |
Caliper Type | Floating |
Casting Number | 15 17 77 |
Grade Type | Regular |
Inlet Fitting Type | Banjo |
9544 | 7/16x20 |
Mounting Bolt Included | No |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Pad Wear Sensor Included | No |
Pads Included | No |
7609 | 78.7146 MM |
7609 | 3.099 IN |
Piston Material | Phenolic |
Piston Quantity | 1 |
Bleeder Screw Cap Included | No |
Rust Resistant Coating | Yes |
Dust Boots Included | Yes |
Bleeder Thread Size | 3/8x24 |
Inlet Port Size | 11.09543 MM |
Inlet Port Size | 0.437 IN |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
FAQ_Q3 | Car pulls to one side during braking. Why? |
FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 24000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 24 |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Harmonized Tariff Code (Schedule B) | 8708300050 |
Harmonized Tariff Code (HTS) | 8708305090 |
Canadian Harmonizing Tariff Code | 8708309990 |
UPC | 00082617011143 |
Part Interchanges
- Chrysler 3699892
- Chrysler 4037968
- Dodge 3699892
- Dodge 4030434
- Dodge 4032968
- Dodge 4037968
- Dodge 4213136
- Dodge 4313390
- Plymouth 3699892
- Plymouth 4030434
- Plymouth 4037968
- Plymouth 4213136
- Chrysler 3699892
- Dodge 4213136
- Dodge 4313390
- Dodge 4032968
- Dodge 4037968
- Plymouth 3699892
- Plymouth 4037968
- Plymouth 4213136
- Dodge 3699892
- Chrysler 4037968
- Dodge 4030434
- Plymouth 4030434
Fits Vehicles
- Dodge R400 (1974)
- Dodge Ram 3500 Van (1996-1998)
- Dodge Ram 1500 Van (1995-1998)
- Dodge Ram 2500 Van (1996-1998)
- Plymouth Fury I (1974)
- Plymouth Fury II (1974)
- Plymouth Fury (1974)
- Plymouth Fury III (1974)
- Dodge W100 Pickup (1974)
- Plymouth PB350 (1981-1983)
- Plymouth PB150 (1981-1983)
- Plymouth Trailduster (1974-1981)
- Plymouth PB200 (1978-1980)
- Plymouth PB300 (1978-1980)
- Plymouth PB250 (1981-1983)
- Plymouth PB100 (1978-1980)
- Plymouth Gran Fury (1975-1977)
- Dodge W350 (1981-1989)
- Dodge W250 (1981-1993)
- Dodge W200 (1975-1980)
- Dodge W150 (1977-1993)
- Dodge W100 (1975-1977, 1984-1989)
- Dodge Royal Monaco (1975-1977)
- Dodge Ramcharger (1974-1993)
- Dodge Monaco (1974-1976)
- Dodge D200 (1978-1980)
- Dodge D400 (1978-1981)
- Dodge D450 (1978-1981)
- Dodge D350 (1981-1993)
- Dodge D300 (1978-1980)
- Dodge D250 (1981-1993)
- Dodge D150 (1978-1993)
- Dodge D100 (1978-1979, 1984-1989)
- Dodge B2500 (1995-1998)
- Dodge B3500 (1995-1998)
- Dodge CB300 (1978-1980)
- Dodge B300 (1978-1980)
- Dodge B350 (1981-1994)
- Dodge B200 (1978-1980)
- Dodge B250 (1981-1994)
- Dodge B1500 (1995-1998)
- Dodge B150 (1981-1994)
- Chrysler Town & Country (1974-1977)
- Dodge B100 (1978-1980)
- Dodge RD200 (1978-1980)
- Chrysler Newport (1974-1978)
- Chrysler New Yorker (1974-1978)
- Chrysler Imperial (1974-1975)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!