Name: A-1 Cardone 18-4127 Brake Caliper
SKU: 184127
Price: 43.99 USD
Availability: InStock

A-1 CARDONE part description

100% O.E.-specific rubber seals ensure like-new performance.
100% pressure testing guarantees proper braking function on the vehicle.
Copper washers are included for a perfect seal.
Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
New bleeder screws provide trouble-free bleeding and a positive seal.
Plastic cap plug in brake port line protects threads before installation.

Product Description

Brake Caliper

Application Summary

Cadillac Brougham 1992-87, Commercial Chassis 1996-92 1984-79, Fleetwood 1996-93 1986-79; Checker Marathon 1982-80; Chevrolet C10 1986-79, C10 Suburban 1986-79, C20 1986-79, C20 Suburban 1986-79, G10 1995-79, G20 1995-79, K5 Blazer 1982-79, P10 1980-79, P20 1989-79, R10 1987, R10 Suburban 1988-87, R1500 Suburban 1991-89, R20 1988-87, R20 Suburban 1988-87, R2500 Suburban 1991-89; GMC C1500 1986-79, C1500 Suburban 1986-79, C2500 1986-79, C2500 Suburban 1986-79, G1500 1995-79, G2500 1995-79, Jimmy 1982-79, P1500 1980-79, P2500 1989-79, R1500 1987, R1500 Suburban 1991-87, R2500 1988-87, R2500 Suburban 1991-87

Features & Benefits

Pistons are durable, resistant to cracking or pitting and handle great loads.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
New stainless steel hardware clips and new mounting pins are included where applicable.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

Product Attributes

Inlet Port Size	0.39
Piston Quantity	1
Piston Material	Steel
Package Contents	Caliper; Instruction Sheet; Hardware Kit
Bleeder Port Size	M10x1.5
Brake Caliper Finish	Oil Emulsion
Installation Hardware Included	Yes
Pads Included	No
Mounting Bolts Included	Yes
Product Condition	Remanufactured
E-waste	No
Piston Size (OD) (mm)	74.55
Piston Size (OD) (in)	2.94
FAQs	What type of grease is used on floating caliper mounting pins?
Features and Benefits	Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper Color	Gray
Abutment Clips Included	No
Anti-Rattle Spring Included	Yes
Bleeder Screw Included	Yes
9559	1
Bracket Included	No
Caliper Casting Material	Cast Iron
Caliper Color	Gray
9611	Oil Emulsion
Caliper Slides Included	Yes
Caliper Type	Floating
Casting Number	18007152
Grade Type	Regular
Inlet Fitting Type	Banjo
9544	M10x1.5
Mounting Bolt Included	Yes
Mounting Bracket Included	No
Mounting Hardware Included	Yes
Mounting Hole Diameter	0.636 IN
Mounting Hole Diameter	16.14804 MM
9543	16.14804 MM
9543	0.636 IN
Pad Wear Sensor Included	No
Pads Included	No
7609	74.548 MM
7609	2.935 IN
Piston Material	Steel
Piston Quantity	1
Bleeder Screw Cap Included	No
Rust Resistant Coating	Yes
Dust Boots Included	Yes
Bleeder Thread Size	M10x1.5
Inlet Port Size	10.00366 MM
Inlet Port Size	0.394 IN
Contains Electronic Components	No
Does it require SDS	No
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is the item CARB affected	No
FAQ_Q1	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQ_Q2	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3	Car pulls to one side during braking. Why?
FAA_A3	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4	Brakes squeal all of the time. What's causing the squeal?
FAA_A4	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5	Could calipers be the cause of a low brake pedal?
FAA_A5	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6	What type of grease is used on floating caliper mounting pins?
FAA_A6	A silicone grease is used on floating caliper mounting pins.
FAQ_Q7	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7	New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

Additional Information

Remanufactured Part	Y
Warranty Distance	24000
Warranty Distance UOM	DH
Warranty Special UOM	TX
Warranty Time	24
Warranty Time UOM	MO
Country of Origin (Primary)	MX
Harmonized Tariff Code (Schedule B)	8708300050
Harmonized Tariff Code (HTS)	8708305090
Canadian Harmonizing Tariff Code	8708309990
UPC	00082617011549

Part Interchanges

Fits Vehicles

GMC R1500 (1987)
GMC R2500 (1987-1988)
GMC R1500 Suburban (1987-1991)
GMC R2500 Suburban (1987-1991)
GMC P1500 (1979-1980)
GMC P2500 (1979-1989)
GMC Jimmy (1979-1982)
GMC G2500 (1979-1995)
GMC G1500 (1979-1995)
GMC C2500 Suburban (1979-1986)
GMC C2500 (1979-1986)
GMC C1500 Suburban (1979-1986)
GMC C1500 (1979-1986)
Chevrolet R2500 Suburban (1989-1991)
Chevrolet R20 (1987-1988)
Chevrolet R1500 Suburban (1989-1991)
Chevrolet R10 Suburban (1987-1988)
Chevrolet R20 Suburban (1987-1988)
Chevrolet R10 (1987)
Chevrolet P10 (1979-1980)
Chevrolet P20 (1979-1989)
Chevrolet G20 (1979-1995)
Chevrolet G10 (1979-1995)
Chevrolet C20 Suburban (1979-1986)
Cadillac Brougham (1987-1992)
Chevrolet C20 (1979-1986)
Chevrolet C10 (1979-1986)
Chevrolet C10 Suburban (1979-1986)
Chevrolet K5 Blazer (1979-1982)
Cadillac Fleetwood (1979-1986, 1993-1996)
Cadillac Commercial Chassis (1979-1984, 1992-1996)
Checker Marathon (1980-1982)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)