Cole Hersee 58327-06 - 58327-06 - 56327 / 58327 Series

Cole Hersee Rocker Switches are manufactured in many different configurations and can be either snap-in or bracket mounted.
Weather-Resistant Rocker Switches are certified to IP66 protection against dust and prolonged spray. Recognized at UL 1500: Ignition protection for marine products
Actuators can be illuminated or imprinted, contain pilot lights or have both pilots and imprinting. Accessories include rocker switch brackets for in-dash mounting and a mounting kit for under dash applications.

• 25A at 12V DC. ledLight-emitting diode. LEDs are electronic lights. As such they draw far less current that conventional incandescent lights, and they are far more efficient. Check out our PL-612 series pilot lights and 58312 series LED rocker switches. Although there's a trend to replacing incandescent lighting with LED, there are plenty of users with incandescent lighting - and we will continue to stock incandescent. If you change from incandescent to LED, remember you will need to replace your fuses with lower amperage types. or incandescent. These general purpose switches are suitable for many kinds of applications. They are weather-resistant with contact areas sealed to IP66 (high pressure wash resistant). Switches snap into standard rocker switch holes 1.45" x 0.08" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm). Pilot lights are independentIlluminated Rocker or Toggle Switches have dependent or independent illumination. The pilot light on the DEPENDENT switch is On when the switch is actuated and the load is energized (and Off when it's not). The pilot light on an INDEPENDENT switch is turned On by an external switch, whether load is On or Off. It may at first seem counterintuitive, but the pilot lights of an INDEPENDENT switch are independent of the state of the switch. or dependent, as noted. They have silver contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts., which give superior switching performance. Housing is matte black.
• Wiring your switch: There are up to 6 terminals on this switch series. Identify each type of switch by matching it with the appropriate wiring diagram in each section. Diagrams represent the switch as seen from the back. Dotted lines indicate the internal connections of the pilot light(s).
• Four blade terminals. Two red lenses.

Switch type	Rocker
Description	Weather-Resistant Rocker Switch, 2 Circular Dependent Pilot Lights
Circuitry	SPDT
Electrical rating	25A at 12V DC
Contacts	Silver
Housing	Plastic, Black
Up position	On (2-1)
Center position	Off
Down position	On (2-3)
Terminals	4 blade
Actuator material	Plastic
Actuator type	Rocker Button/ sealed
Actuator: inches	1.19" x .660"
Actuator: mm	Weather-Resistant Rocker Switch, 2 Circular Dependent Pilot Lights
Actuator color	Black
Actuator imprint	None
Illuminated	Yes
Lens 1 color	Red
Lens 2 color	Red
Lens 1 size	.200" ( 5.10mm) Dia.
Lens 2 size	.200" ( 5.10mm) Dia.
Lens 1 imprint	None
Lens 2 imprint	None
Imprint color	None
Bezel type	Plastic, Black
Bezel size	.964"(24.52mm) x 1.69"(43.16)
Mounting	Panel snap-in
Panel thickness	.093" (2.37mm) to .187" (4.76mm)
Mounting hole: inches	1.45" x .830"
Mounting hole: mm	36.83mm x 21.08mm
Min qty	No

COLE HERSEE 58327-06 Cross Reference

We have 2 alternatives for the 58327-06 by COLE HERSEE:

• 58327-01
• 747730230689