Name: Cole Hersee 24063-08 24063-08 - Continuous Duty SPST Series
SKU: 2406308
Price: 1319.8 USD
Availability: InStock

COLE HERSEE part description

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.

All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

UL & ceCE (ConformitÃƒÂ© EuropÃƒÂ©enne) The CE marking is a logo which denotes conformity to European standards. It consists of the stylized letters Ã¢ï¿½ï¿½CEÃ¢ï¿½ï¿½. The CE marking is put on products regulated by European health, safety and environmental protection legislation, and is obligatory for certain products sold in Europe. listed'UL Listed' Indicates that a device or component has met certain specifications as established by Underwriters Laboratory. It means that the device or component has been tested for conformance and is with UL so the device can be maked with the UL logo and the manufacturer claims conformance to the appropriate specification. Note that the ratings on UL electrical devices can be very conservative!. PVC-coated
continuousCertain switches, like solenoids can be rated for continuous or intermittent (infrequent) use. A comparably-constructed switch can generally be used with a higher current than the other switch, but with the proviso that a cooling time is allowed. There are no such restrictions on a 'continuous duty' switch. You can use a Continuous Duty Solenoid instead in place of an Intermittent Duty Solenoid, but it would have a shorter life expectancy compared to the purpose-built Intermittent Duty Solenoid. You cannot use an Intermittent Duty Solenoid in place of a Continuous Duty Solenoid! Duty 65A at 24V DC, Insulated.
Intermittent: 120A make, 65A Break, 10 sec On, 30min Off

Description	Continuous Duty Solenoid
Special applications	Marine
UL Marine & CE ISO 8846 Marine	Yes
Insulated/Grounded	Insulated
NO/NC	normally open
Circuitry	SPST
Contacts	copper
Housing	PVC-coated plated steel
Voltage rating	24V
Terminals	copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
Continuous rating	65A
Intermittent	120A make 65A break 10sec On 30min Off.
Bracket	Straight
Bracket mounting	Holes 5/16" x 19/32", 2-13/64" on center
Breather hole	no

COLE HERSEE 24063-08 Cross Reference

We have 2 alternatives for the 24063-08 by COLE HERSEE:

Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)