Cole Hersee 24401-01 - 24401-01 - Continuous Duty DPST Series

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.


All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

• spdtSingle Pole, Double Throw. Circuitry which describes a switch. Single Pole means that this switch controls one circuit. Double Throw means that this switch has two On positions. It could be an On-On or an On-Off-On. Normally Off and Normally On.
• Special applicationIn Engineering, an application refers to a specific use for a device. For example, a Cole Hersee brand LVD finds an application in police cruisers (as well as many other uses).: for forward and reverse systems in electric golf carts, garden tractors, fork lift trucks, winches, etc.
• Housing: Steel.
• Continuous Duty, Normally Closed contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts. 35A, Normally Open contacts 85A.

Description	DPDT Continuous Duty Solenoid
Special applications	Forward & reverse systems in golf carts,
Insulated/Grounded	Grounded
NO/NC	Normally open and normally closed
Circuitry	SPDT
Contacts	copper
Housing	plated steel
Voltage rating	12V
Terminals	copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
Bracket	Straight
Bracket mounting	Holes 5/16" x 19/32", 2-1/8" on center
Breather hole	no
UL Marine & CE ISO 8846 Marine	Not listed

COLE HERSEE 24401-01 Cross Reference

We have 2 alternatives for the 24401-01 by COLE HERSEE:

• 24401
• CHS2440101