Cole Hersee 24022 - 24022 - Intermittent Duty SPST Series

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.


All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

• 750A make, 100A break, 10sec On, 20min Off.
• Contacts: Copper.
• Terminals: Copper. Small ignition and ground terminal is 10-32 thread. Large terminals are 5/16" -24 thread. Hexnuts and lockwashers are included.
• Bracket mounting holes 5/16 x 19/32,” 2 13/64" on centers (7.9 x 15.1, 56.0mm)
• Phenolic/plated steel housing.
• In this applicationIn Engineering, an application refers to a specific use for a device. For example, a Cole Hersee brand LVD finds an application in police cruisers (as well as many other uses)., 3 is Normally Open. It becomes common with 1 and 4 when the solenoidAn electromechanical device (or relay) that is used to switch large currents. It consists of a coil of wire and a moving contact that makes an electrical connection when the coil of wire is energized. Cole Hersee manufactures over 50 kinds of solenoid. See # 24059 is energized. Commonly used in engine starting applications.
• Bracket mounting holes 9/32" x 25/64,” 2 7/64" on centers (7.1 x 9.9, 53.6mm).

Description	Intermittent Duty Solenoid
Special applications	Universal
Insulated/Grounded	Grounded
NO/NC	normally open
Circuitry	SPST
Contacts	copper
Housing	Phenolic/plated steel
Voltage rating	12V
Terminals	copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
Maximum current: make/inrush	750A
Maximum current: break/make	100A
Intermittent time	10 sec. On - 30 min. Off
Bracket	Straight
Bracket mounting	Holes 5/16" x 19/32", 2-13/64" on center
Breather hole	no
Other information	Coil wired to battery stud internally
UL Marine & CE ISO 8846 Marine	Not listed

COLE HERSEE 24022 Cross Reference

We have 1 alternatives for the 24022 by COLE HERSEE:

• CHS24022