ROBINAIR 12458 Process Tube Adapter Kit

Features and Benefits

• No. 12458 Process Tube Adapter Kit provides the fastest and easiest means for connecting charging lines to process tubes for evacuating and recharging a system.
• The design ensures an absolute seal between the tubing and the charging hose.
• It eliminates the need for flaring and the possibility of tubing chips getting into the system.
• Instructions:
• Depressurize the system following the manufacturer?s instructions. Adapter parts and tubing must be free of oil and moisture.
• Install a piercing valve on the process tube. (See illustration at right.)
• Cut the end off the process tube behind the pinch-off point or solder.
• Slide the cap and the appropriate size seal and washer assembly (for 3/16", 1/4", 5/16", or 3/8" tubing) onto the process tube.
• Thread the body into the cap until it is hand tight.
• Connect the charging line. Evacuate and recharge the system.
• Use Robinair No. 12396 Pinch-off Tool, not included, to crimp the tubing.
• Remove the process fitting.
• Solder the end of the process tube.