A-1 Cardone 2C-2959 - Brake Caliper
- Part Number
- 2C-2959
- Manufacturer
- A-1 CARDONE
- Description
-
Brake Caliper
details
$13049
5 day lead time
limited availability at this price!
. Learn more
A-1 CARDONE part description
Product Description
Brake Caliper
Application Summary
Acura RDX 2012-07; Honda Accord Crosstour 2011-10, Crosstour 2015-12, CR-V 2016-07, Odyssey 2010-05
Features & Benefits
- Engineered to meet or exceed O.E. performance.
- Zinc plating offers a silver O.E.-like finish.
- Ideal for commercial use as well as performance vehicles.
- Every unit is 100% tested to ensure reliable performance.
- No core return required.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
Product Attributes
| Inlet Port Size | M10x1.0 |
| Piston Quantity | 2 |
| Piston Material | Steel |
| Package Contents | Caliper; Instruction Sheet; Bracket; Hardware Kit |
| Bleeder Port Size | M10x1.25 |
| Brake Caliper Finish | Zinc Plated |
| Installation Hardware Included | Yes |
| Pads Included | No |
| Mounting Bolts Included | No |
| Product Condition | New |
| E-waste | No |
| Piston Size (OD) (mm) | 45.26 |
| Piston Size (OD) (in) | 1.78 |
| Features and Benefits | Zinc plating offers a silver O.E.-like finish. |
| Caliper Color | Silver |
| Abutment Clips Included | Yes |
| Anti-Rattle Spring Included | No |
| Bleeder Screw Included | Yes |
| 9559 | 1 |
| Bracket Included | Yes |
| Caliper Casting Material | Cast Iron |
| Caliper Color | Silver |
| 9611 | Zinc Plated |
| Caliper Slides Included | Yes |
| Caliper Type | Floating |
| Grade Type | Regular |
| Inlet Fitting Type | Banjo |
| Mounting Bolt Included | No |
| Mounting Bracket Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Diameter | 0.551 IN |
| 9543 | 0.551 IN |
| Pad Wear Sensor Included | Yes |
| Pads Included | No |
| 7609 | 45.26 MM |
| 7609 | 1.78 IN |
| Piston Material | Steel |
| Piston Quantity | 2 |
| Rust Resistant Coating | Yes |
| Bleeder Thread Size | M10x1.25 |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
| FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
| FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
| FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
| FAQ_Q3 | Car pulls to one side during braking. Why? |
| FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
| FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
| FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
| FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
| FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
| FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
| FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
| FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
| FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Additional Information
| Remanufactured Part | N |
| Warranty Distance UOM | MI |
| Warranty Special | Limited Lifetime |
| Warranty Special UOM | TX |
| Warranty Time UOM | MO |
| Country of Origin (Primary) | CN |
| Canadian Harmonizing Tariff Code | 8708309920 |
| Harmonized Tariff Code (Schedule B) | 8708300050 |
| Harmonized Tariff Code (HTS) | 8708305090 |
| UPC | 00884548292574 |
Part Interchanges
Fits Vehicles
- Honda Crosstour (2012-2015)
- Honda Accord Crosstour (2010-2011)
- Honda CR-V (2007-2016)
- Acura RDX (2007-2012)
- Honda Odyssey (2005-2010)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!
