Cole Hersee 24008 - 24008 - Intermittent Duty SPST Series

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.


All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

• Contacts: Copper.
• Terminals: Copper. Small ignition and ground terminals are 10-32 thread. Large contact terminals are 5/16" -24 thread. Hexnuts and lockwashers are included.
• Bracket mounting holes 5/16 x 19/32,” 2 13/64" on centers (7.9 x 15.1, 56.0mm)
• 120A make, 65A break. 10 sec On, 30 min Off.

Description	Intermittent Duty Solenoid
Special applications	Universal
Insulated/Grounded	Insulated
NO/NC	normally open
Circuitry	SPST
Contacts	Copper
Housing	plated steel
Voltage rating	12V
Terminals	10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
Maximum current: make/inrush	750A
Maximum current: break/make	120A 10secs On, 30mins Off
Bracket	Straight
Bracket mounting	Holes 5/16" x 19/32", 2-13/64" on center
Breather hole	no
UL Marine & CE ISO 8846 Marine	Not listed

COLE HERSEE 24008 Cross Reference

We have 1 alternatives for the 24008 by COLE HERSEE:

• CHS24008