A-1 Cardone 1H-20225 - Remanufactured Power Steering Pump with Reservoir, for 26-9 Mazda 3 / 26-1 Mazda 5
- Part Number
- 1H-20225
- Manufacturer
- A-1 CARDONE
- Description
-
Remanufactured Power Steering Pump with Reservoir, for 26-9 Mazda 3 / 26-1 Mazda 5
details
$31399
+$158.40 Core Deposit
Total price w/ core: $472.39
In stock
limited availability at this price!
A-1 CARDONE part description
Product Description
Power Steering Pump
Application Summary
Mazda 3 2009-06, 3 Sport 2009, 5 2010-06
Features & Benefits
- During the engineering phase, every unit is tested to ensure perfect fit and function on the vehicle.
- All critical components (cam packs, armature, reservoir, etc.) are tested to match O.E. performance standards.
- All units are built with 100% new, O.E.-quality O-rings, seals, bearings and gaskets.
- Shafts and surfaces are machined to precise specifications to eliminate premature wear and extend product life.
- Weak solder points are 100% reflowed to extend life expectancy.
- To ensure reliable performance, final assembly is computer-tested to measure pressure, bypass, fluid flow, steering effort, current and noise.
Power Steering Pump, Electronic Power Steering Pump, Pump, Hydraulic Power Steering Pump, Electronic Hydraulic Pump, Electronic Hydraulic Power Steering Pump, EHPS, Electro-Hydraulic Steering Pump
Product Attributes
Reservoir Included | Yes |
Package Contents | Electronic Hydraulic Power Steering Pump; Sealing Kit |
Product Condition | Remanufactured |
Mounting Hardware Included | No |
Housing Material | Aluminum; Plastic |
Pulley Included | No |
Power Steering Outlet Thread Size | 14x1.5 |
Hose Port Type | O-Ring |
Remote Reservoir | Yes |
Power Steering Reservoir Cap Included | No |
Power Steering Pump Inlet Attachement Type | Barb |
Power Steering Pump Outlet Attachment Type | Threaded |
Power Steering Pump Outlet Quantity | 1 |
E-waste | Yes |
FAQs | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
Features and Benefits | Weak solder points are 100% reflowed to extend life expectancy. |
Filter Included | No |
Hose Port Type | O-ring |
Inlet Attachment Type | Barb |
Inlet Diameter | 0.424 IN |
Inlet Diameter | 10.75 MM |
Inlet Quantity | 1 |
Mounting Hardware Included | No |
Outlet Attachment Type | Threaded |
Outlet Quantity | 1 |
Pulley Included | No |
9476 | Yes |
9898 | No |
9477 | No |
Reservoir Included | Yes |
Type | Hydraulic |
Contains Electronic Components | Circuit Board |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Why use EHPS pumps over the traditional belt driven power steering pumps? |
FAA_A1 | Automobile manufacturers are favoring EHPS pumps because they result in better performance and fuel economy. EHPS pumps eliminate the belt and pulley rotational mass that a traditional pump would require. |
FAQ_Q2 | What does an EHPS pump consist of? |
FAA_A2 | An EHPS pump consists of an electronic motor and a hydraulic pump. The electronic motor generates the required RPMs for the pump to produce flow and pressure to supply the power steering system. |
FAQ_Q3 | Can an EHPS pump be serviced? |
FAA_A3 | Most automobile manufactures do not recommend servicing individual components of an EHPS pump. These pumps are replaced as complete units. |
FAQ_Q4 | What is needed for an EHPS pump to function? |
FAA_A4 | Unlike traditional power steering pumps, the EHPS pumps require a 12-volt power supply. Most EHPS pumps will also require communication with an external module. |
FAQ_Q5 | Can regular power steering fluid be used for EHPS systems? |
FAA_A5 | No. You must use the correct fluid specified in the O.E. service manual or owner’s manual of the vehicle being serviced. |
FAQ_Q6 | Where is an EHPS pump usually located? |
FAA_A6 | An EHPS pump has a different appearance than a traditional power steering pump and is usually mounted on the passenger side behind the front bumper. |
FAQ_Q7 | Will the power steering fluid need to be flushed? |
FAA_A7 | Yes. The hydraulic system must be flushed according to the O.E. service intervals. Failure do to so can cause premature damage to the EHPS pump and other power steering components. |
FAQ_Q8 | Will the system need to be bled after replacing an EHPS pump? |
FAA_A8 | Yes, a bleeding procedure must be performed, just like a traditional belt-driven power steering system. |
Outlet Thread Size | 14x1.5 |
Additional Information
Remanufactured Part | Y |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Canadian Harmonizing Tariff Code | 8413600011 |
Harmonized Tariff Code (Schedule B) | 8413600020 |
Harmonized Tariff Code (HTS) | 8413600020 |
Warranty Distance | 36000 |
Warranty Time | 36 |
UPC | 00082617950312 |
Part Interchanges
Fits Vehicles
- Mazda 3 Sport (2009)
- Mazda 5 (2006-2010)
- Mazda 3 (2006-2009)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!