A-1 CARDONE part description

Product Description

Rack and Pinion Assembly

Application Summary

Nissan Cube 2014-09

Features & Benefits

  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Rack and Pinion, EPS, Manual Rack and Pinion, EPS Rack and Pinion

Product Attributes

Casting Material ALUMINUM
Package Contents Rack and Pinion; Instruction Sheet
Product Condition Remanufactured
Mounting Brackets Included NO
Tie Rod Ends Included Yes
Grade Type Regular
E-waste No
Rack Length (mm) 1025.53
Distance Between Mounting Holes (in) 12.69
Distance Between Mounting Holes (mm) 322.26
Input Shaft Diameter (in) 0.75
Input Shaft Length (in) 5.19
Input Shaft Length (mm) 131.76
Rack Length (in) 40.38
Features and Benefits Finished in protective coating to prevent corrosion and rust.
Gasket or Seal Included NO
Outer Tie Rods Included NO
Bellows Color BLACK
Type Manual
6511 1025.12 MM
End To End Length 40.38 IN
Gasket Or Seal Included No
Grade Type Regular
Inner Tie Rods Included Yes
Mounting Brackets Included No
Mounting Hardware Included No
Mounting Hole Quantity 2
Outer Tie Rods Included No
Steering Input Shaft Diameter 19.04 MM
6514 0.75 IN
Bellows Color Black
Total Turns Lock To Lock 3.25
Type Manual
Input Shaft Type Double Flat
Contains Electronic Components No
Does it require SDS No
Is Item A Chemical No
Is Or Contains A Battery No
Is Or Contains A Bulb No
Is Prop Sixty Five Affected No
Is the item CARB affected No
FAQ_Q1 What do you replace on the rack?
FAA_A1 Rubber seals, dust boots, wear items, lubricant(s), clamps and bearings are replaced 100%. Dampers, lock washers and drive belts are replaced where applicable.
FAQ_Q2 Are the racks the same design as my original?
FAA_A2 Yes, all units produced are verified to function to O.E. design specifications. Potential O.E. failure modes are evaluated and validated improvements are made.
FAQ_Q3 Are there any precautions before I install?
FAA_A3 Yes, the steering wheel must be held in a straight-ahead position using a suitable tool to prevent rotation while the intermediate shaft is disconnected from the rack and pinion. Failure to do so can result in damage to the clock spring within the steering column. If rotation of the intermediate shaft is suspected, the clock spring must be removed and re-centered.
FAQ_Q4 Do I have to do any type of relearn after installation?
FAA_A4 Yes, these systems are equipped with torque angle sensors in the steering column that need to be recalibrated after installation of the replacement rack and pinion.
FAQ_Q5 Can I install one of your racks on my custom or classic vehicle?
FAA_A5 Not recommended; radical modifications would be needed for installation of a modern electronic steering rack and pinion on a vehicle other than the O.E .Manufacturer intended application.

Additional Information

Remanufactured Part Y
Warranty Distance UOM DH
Warranty Special UOM TX
Warranty Time UOM MO
Country of Origin (Primary) MX
Harmonized Tariff Code (Schedule B) 8708948000
Harmonized Tariff Code (HTS) 8708947550
Warranty Distance 36000
Warranty Time 36
Canadian Harmonizing Tariff Code 8708949900
UPC 00884548285385

Part Interchanges

Fits Vehicles

  • Nissan Cube (2009-2014)

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from A-1 CARDONE (Browse all)