A-1 Cardone 1B-1010 - Air Brake Disc Caliper
- Part Number
- 1B-1010
- Manufacturer
- A-1 CARDONE
- Description
-
Air Brake Disc Caliper
details
We cannot fulfill orders for this part at this time. Please check back later or request a stock notification to receive an email.
Sometimes we may have similar parts for sale, click the button below to see if anything matches.
A-1 CARDONE part description
Product Description
Air Brake Disc Caliper
Features & Benefits
- As much as 90% new parts.
- Outfitted with proprietary grease to prolong caliper life.
- All new and renewed components are manufactured to O.E. performance standards
- End of line actuation test on internal clutch chain lever bridge bearings.
- Guide pins and bushings tested for slide.
- Components are torqued to O.E. specifications for proper long-term function.
Caliper, Air Disc Caliper, Disc Caliper, Brake Caliper, Disc Brake Caliper
Product Attributes
Piston Quantity | 2 |
Casting Material | Iron |
Piston Material | Steel |
Package Contents | Caliper, Bushing Kit Installed, Carrier |
Pads Included | No |
Product Condition | Remanufactured |
Grade Type | Standard Replacement |
Mounting Bracket Included | Yes |
E-waste | No |
Features and Benefits | Outfitted with proprietary grease to prolong caliper life. |
Casting Number 1 | Z035247 |
Pad Wear Sensor Included | No |
Caliper Type | Air Disc |
Caliper Slides Included | Yes |
Caliper Color | Black |
Mounting Hole Diameter | 0.545 |
FAA_A1 | ADB calipers generate much shorter stops under the same loads and speeds when compared to drum brakes. ADB calipers enhance braking capability and increase safety. The brake pads may last twice as long as drum linings in most cases. ADB calipers also have a sealed design with an integrated automatic brake adjuster for optimal performance. This design also allows for easy access to the brake pads for a significantly quicker installation. |
FAA_A2 | There are two ADB caliper designs. The first type is a sliding caliper with an integral brake actuator. This consists of a brake actuator that moves an eccentrically supported lever which transmits the force to the brake pads through a bridge with a threaded spindle on the end of the piston. The second type is a floating caliper. This design consists of a main body which includes the actuating and adjustment mechanisms and a brake carrier which enables the caliper to slide while holding the brake pads and transferring the load that is exerted during brake application to the axle. |
FAA_A3 | Most manufacturers recommend a visual brake pad wear inspection every three months or 20,000 miles. A more thorough inspection is recommended at six months or 50,000 miles. Refer to the service intervals stated by the caliper original equipment manufacturer. |
FAA_A4 | Most rotor manufacturers state that small radial cracks, no more than 1.5 mm wide and 1 mm deep are acceptable provided the cracks don't extend across more than 75 percent of the disc face. A rotor with cracks that extend to either edge of the rotor should be replaced. Grooves are acceptable as long as the groove is no deeper than 1.5 mm. Refer to the rotor manufacturer for exact specifications. |
FAA_A5 | For most applications there is no need to remove the wheels. Inspection can be done by checking the wear indicators on the brake caliper with a flashlight. |
FAQ_Q1 | What advantages do Air Disc Brake (ADB) calipers have compared to drum brakes? |
FAQ_Q2 | How many types of ADB calipers are there? |
FAQ_Q3 | How often should the ADB caliper pads be checked? |
FAQ_Q4 | What is acceptable wear on the rotor face? |
FAQ_Q5 | Is there a need to remove the wheels for inspection? |
Additional Information
Remanufactured Part | Y |
Warranty Distance UOM | MI |
Warranty Special | Unlimited Mile |
Warranty Special UOM | TX |
Warranty Time | 12 |
Warranty Time UOM | MO |
Country of Origin (Primary) | US |
Harmonized Tariff Code (Schedule B) | 8708300050 |
Harmonized Tariff Code (HTS) | 8708305090 |
Canadian Harmonizing Tariff Code | 8708309920 |
UPC | 00884548287648 |
Part Interchanges
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!